2m 6Element Wideband Antenna 2m6WB 144-146MHz
Solid lightweight 2m 6Element Wideband Antenna 2m6WB for portable or permanent use. Perfect for MS or even EME with 100W
Could be produced in three versions:
- 2m6DX – for the DX part of the band 144-145MHz. Excellent for 2m contests as stack antenna
- 2m6WB – wideband version 144-146MHz
- 2m6Wide – extra wideband version with 4MHz bandwidth 144-148MHz Region 2
What does 2m6WB mean?
- 2m – 2m band
- 6 – 6 elements
- WB – WideBand version covers 144-146 MHz
Electrical Specifications of 2m 6Element Wideband Antenna 2m6WB
Frequency Range: 144 – 146 MHz
Free Space Forward Gain: 11.3 dBi
Front-to-Back Ratio: 25 dB
-3 dB Horizontal Beamwidth: 47°
Polarization: Horizontal or Vertical
Nominal Input Impedance: 50 Ohms
SWR Across Entire Band: < 1.2
Maximum Power Input: 500W (By order “P” Power version 1500W)
Matching Method: Direct feed through common mode choke (current balun)
Mechanical Specifications of 2m 6Element Wideband Antenna 2m6WB
Number of elements: 6
Element Diameter: 8 mm Aluminum tube
Dipole Diameter: 8 mm Hard Copper tube plastic coated
Longest element: 1040 mm
Element Mounting Position: Below the Boom
Balun and Connectors: Included
Boom Length: 2 m
Boom Size: 20 x 20 mm
Number of Boom Pieces: 2
Guy rope support: Not necessary. Strong boom
Mounting Mast Diameter: 43 – 70 mm 1-11/16″ – 2-3/4″ OD
Survival Wind Speed: 150 km/h
Transportation Length: 1.1 m
Antenna Weight: 1.8 kg
What Others are Saying:
Antennas-Amplifiers Product Benefits. A Major advance in Amateur Radio antenna design.
- F/B and G/T superiority.
All antennas have been calculated using state-of-the-art full 3D Electromagnetic Simulation Software including the influence of the boom, bracket, baluns, and connectors. The performance of antennas designed using these techniques is exceptional, far better than antennas designed using “wire” programs.
- No tuning antennas
Before dispatch, we assemble each antenna and test antenna characteristics. That means you may expect exceptionally good electrical and mechanical attributes including low SWR across the designed range immediately after assembling.
No need to tune the dipole, or any other element to get perfect SWR on the intended frequency range. Everything is pre-tuned.
- Easy to set up
Everything is labeled, just put number to number. The antenna can be assembled with hand tools in a couple of minutes.
Everything is included in the antenna box: Antenna, balun with connector, and bracket. Yours is just to assemble and have fun!
Horizontal or vertical antennas
2m CROSS antennas
2m XPOL antennas