2m 12Elements Low Noise EME Antenna 2m12DX7

2m 12Elements Low Noise EME Antenna 2m12DX7

(1 customer review)

269,00 

2m 12Elements Low Noise EME Antenna 2m12DX7 for Low Noise EME and VHF Contests

SKU: 0680 Categories: ,

Superior G/T 2m 12Elements Low Noise EME Antenna 2m12DX7

The best-performance 2m 12Elements Low Noise EME Antenna 2m12DX7 in the class length of 7m. Superior G/T -4.68dB and extremely low noise. Excellent for VHF contests as a single antenna or in the stack. If you don’t want to be disturbed by other stations in the VHF or competitions or want to enjoy EME successfully digging weak signals this 12-element super Yagi antenna 2m12DX7 is the right choice. Not too long and not too short antenna. The right choice to take on mountains or EME expeditions.

 

2m 12 Elements Low Noise EME Antenna 2m12DX7 the highest suppressions of all side lobes

2m 12 Elements Low Noise EME Antenna 2m12DX7 the highest suppressions of all side lobes

 

What does 2m12DX7 mean?

  • 2m – 2m band
  • 1212 elements
  • DX – Covers DX part of 2m band 144-145MHz
  • 7 – About 7m boom

Electrical Specifications of 2m 12Elements Low Noise EME Antenna 2m12DX7

Frequency Range: 144 – 145 MHz
Free Space Forward Gain: 15.72 dBi
Front-to-Back Ratio: 32 dB
-3 dB Horizontal Beamwidth: 31.4°
G/T
for old reference: Tsky=200K Tearth=1000K: -1.75dB
G/T for new reference: Tsky=290K Tearth=5400K: -4.68 dB
Polarization: Horizontal
Nominal Input Impedance: 50 Ohms
SWR Across Entire Band: < 1.2
Maximum Power Input: 1500W
Matching Method: Direct feed through common mode choke (current balun)
Connector: “N”

 

Power versions of super low noise EME antenna 2m12DX7

“E” – Extra power 7/16 DIN Input connector 7mm SM250 Teflon balun cable: 2000W 2m12DX7E
“EX” – EXtreme power 7/16 DIN Input connector 10mm RG115 Teflon balun cable: 5000W 2m12DX7EX

 

2m 12Elements Low Noise EME Antenna 2m12DX7 Calculated G/T

2m 12Elements Low Noise EME Antenna 2m12DX7 Calculated G/T

 

Mechanical Specifications of 2m Super Yagi EME antenna 2m12DX7

Number of elements: 12
Element Diameter: 8 mm Aluminum tube
Dipole Diameter: 8 mm Hard Copper tube plastic coated
Longest element: 1040 mm
Element Mounting Position: Below the Boom
Balun and Connector: Included
Boom Length: 7 m
Boom Size: Tapered Boom 40x40mm, 30x30mm, 20x20mm
Number of Boom Pieces: Depends on the version. “B” 5 pieces. “A” version 6 pieces
Guy rope support: Yes, Included
Mounting Mast Diameter: 43 – 70 mm 1-11/16″ – 2-3/4″ OD
Survival Wind Speed: 150 km/h
Transportation Length: 1.19 m “A” or 1.49m “B”
Net Weight: 8.4 kg
Gross Weight: 9.9 kg

 

Lee WW2DX will use these 2m9DX5 and 2m12DX7 antennas on his extremely successful EME expeditions:

 

2m 9Elements Light Weight Antenna 2m9DX5 EME expedition  V26PD – Antigua Mar 2018 – FK97db

2m 9Elements Light Weight Antenna 2m9DX5 EME expedition V26PD–Antigua WW2DX

 

The antennas 2m9DX5 (PA144-9-5A) performed EXCEPTIONALLY well during the WORST EME conditions. Very impressive, congratulations!

The pair of 9’s are in the process of being installed in FN65 in Maine along the Atlantic Ocean for a 100% fully remote EME station.  Lee WW2DX

 

Pair of 2m 12 Elements Low Noise EME Antenna 2m12DX7 on EME expedition FJ/WW2DX

2m 12Elements Super Low Noise Antenna 2m12DX7 EME Expedition FJ-WW2DX

 

CY9C EME expedition with pair 2m12DX7

2m 12Elements Super Low Noise Antenna 2m12DX7 EME Expedition CY9C WW2DX

 

2m 12Elements EME Expedition Antenna 2m12DX7 to CY9C WW2DX

2m 12Elements EME Expedition Antenna 2m12DX7 to CY9C WW2DX

 

Antennas-Amplifiers Product Benefits. A Major advance in Amateur Radio antenna design.

 

  • F/B and G/T superiority.

All antennas have been calculated using state-of-the-art full 3D Electromagnetic Simulation Software including the influence of the boom, bracket, baluns, and connectors. The performance of antennas designed using these techniques is exceptional, far better than antennas designed using “wire” programs.
Comparison of EM simulation software

  • No tuning antennas

Before dispatch, we assemble each antenna and test antenna characteristics. That means you may expect excellent electrical and mechanical attributes including low SWR across the designed range immediately after assembling.
No need to tune the dipole, or any other element to get perfect SWR on the intended frequency range. Everything is pre-tuned.

  • Easy to set up

Everything is labeled, just put number to number. The antenna can be assembled with hand tools in a couple of minutes.
Everything is included in the antenna box: Antenna, balun with connector, and bracket. Yours is to assemble and have fun!

The old name of the antenna was PA144-12-7BGP and PA144-12-7AGP

Check all 2m antennas: 2m antennas
Horizontal or vertical antennas
2m CROSS antennas
2m XPOL antennas

 

Weight 9,8 kg
Dimensions 149 × 17 × 16 cm

1 review for 2m 12Elements Low Noise EME Antenna 2m12DX7

  1. Adrian

    The 12 element 2m antenna PA144-12-7BGP and EME2-144 are working brilliantly in the contests.
    Adrian G4JBH

Add a review