Three band antenna PA50-144HV-17-3-3CB
– 6m Horizontal antenna
– 2m Horizontal antenna
– 2m Vertical antenna
3 band VHF antenna PA50-144HV-17-3-3CB is perfect for small spaces, roofs, DX-peditions or portable…
With smart design, we have enabled that all three antennas on one boom acts as 3 mono-band antennas.
The vertical antenna is located in front of the pole, so there is no problem with metal. No fiberglass rod is required. Attach the antenna to a metal pole without any problems. Strong antenna bracket for the pole sizes: 40 – 70 mm 1-1/4″ – 2-3/4″
The horizontal elements of the 6 meter and 2 meter antenna are specially designed with minimal interference between them.
All three connectors on the PA50-144HV-17-3-3CB are located on the underside of the boom, so installation is very easy.
The 6m band is designed to work perfectly from 50 to 50.5 MHz which makes antenna great for DX hunting. The elements are tapered which makes them more immune to wind and snow. They also resonate less in the wind, keeping the SWR extremely low and also extending the lifespan of the antenna.
The 2 meter DX band is designed for the 144 – 145 MHz ideal for CW, SSB and digital.
The 2 meter band (vertical) is designed for FM simplex and repeaters. frequency coverage 144 – 146 MHz. by order 144-148 MHz Region 2.
| Electrical specifications: | 6m | 2m | 2m Vert. |
| Frequency range: | 50-50.5 | 144-145 | 144-146 |
| Free Space Forward Gain: | 8.5 dBi | 12.1 dBi | 10 dBi |
| Front to Back Ratio: | 21 dB | 27 dB | 29 dB |
| 3 dB Horizontal Beam-width: | 61.4° | 43° | 54.7° |
| SWR Across Entire Band: | < 1.2 | < 1.2 | < 1.2 |
| Polarization: | 6m horizontal, 2m horizontal, 2m vertical |
| Nominal Input Impedance: | 50 Ohms |
| Maximum Power Input: | More than 500 W |
| Matching Method: | Direct feed through common mode balun |
| Common Connector: | 3 x “N” connector |
| Mechanical specifications: | |
| Number of Elements: | 4 + 8 + 5 (17 elements) |
| Elements Diameter: | Tapered elements from 12 mm to 8mm |
| Longest Element: | 3.1 m |
| Connector Mounting Position: | Below the Boom |
| Boom Length: | 3 m |
| Boom Size: | 30 x 30 mm |
| Number of Boom Pieces: | 2 |
| Guy rope support: | Not needed. Strong boom. |
| Balun and Connector: | Included (3 x “N” connector + 3 x balun) |
| Mounting Mast Diameter: | 43 – 70 mm 1-11/16″ – 2-3/4″ OD |
| Clamp: | M8 Stainless Steel |
| Turning radius: | 4.3 m |
| Surface Area: | TBA. |
| Antenna Survival Wind Speed: | 160 km/h |
| Net Weight: | 5.4 kg |
| Gross Weight: | 6.7 kg |
| Transportation Length: | 1.5 m |
PA50-144HV-17-3-3CB antenna comes with included baluns and connectors. A strong bracket as well as a thick 30 x 30 mm boom will enable the longevity of the antenna, and yet the light construction allows the antenna to be rotated on just TV rotator.
Possible power on PA50-144HV-17-3-3CB is determined solely by the balun and connectors used. From 500 W to 2000 W by order.
PA50-144HV-17-3-3CB Yagi antenna is great for anyone who loves Ham Radio (Amateur Radio). Antenna allows multi band operation as well as multi operator operation.
Click here to look up all 6 meter / 2 meter antennas: 6m / 2m antennas
Reviews
There are no reviews yet.