6m and 2m Dual Band Yagi Antenna PA50-144-12-3-2CBP
12 Elements Yagi Antenna on 3 meter Boom. 4 elements on 6 meter and 8 elements on 2 meter.
Engineered solution to work on two most popular VHF bands through one antenna!
The best ham radio antenna for 6 meter and 2 meter bands on the single 3 meter boom.
This two band 6 meter and 2 meter Yagi antenna is ideal for poles where the space is a problem.
Excellent solution for smaller poles as well as a day in the field.
The antenna could be assembled quickly. Strong construction withstands high wind speeds.
Since the antenna has two connectors, it is possible to work with two radio stations through one antenna with added band pass filters.
Specifications for 6 meter and 2 meter dual band antenna PA50-144-12-3-2CBP. 6 meter section:
| Electrical Specifications 6 m | |
| Frequency Range: | 50 – 50.5 MHz |
| Free Space Forward Gain: | 8.5 dBi |
| Front to Back Ratio: | 21 dB |
| 3 dB Horizontal Beamwidth: | TBA° |
| Polarization: | Horizontal or Vertical |
| Nominal Input Impedance: | 50 Ohms |
| SWR Across Entire Band: | < 1.2 |
| Maximum Power Input: | 1000 W, 1500 W available |
| Matching Method: | Direct feed through common mode balun |
| Input Connector: | “N” |
| Mechanical Specifications 6 m | |
| Number of elements: | 4 |
| Element Diameter: | 12 mm, 10 mm and 10 mm Aluminum tube |
| Dipole Diameter: | 12 mm, 10 mm and 10 mm Aluminum tube |
| Longest element: | 3.1 m |
| Element Mounting Position: | Below the Boom |
| Balun and Connectors: | Included |
| Boom Length: | 2.92 m |
| Boom Size: | 30 x 30 mm |
| Number of Boom Pieces: | 2 |
| Guy rope support: | Not necessary. Strong boom |
| Mounting Mast Diameter | 43 – 70 mm 1-11/16″ – 2-3/4″ OD |
| Survival Wind Speed: | 150 km/h |
| Transportation Length: | 1.49 m |
| Antenna Net Weight: | 4.7 kg |
Specifications for dual band 50 MHz and 144 MHz Yagi Antenna PA50-144-12-3-2CBP 2 meter section:
| Electrical Specifications 2 m | |
| Frequency Range: | 144 – 145 MHz |
| Free Space Forward Gain: | 12.1 dBi |
| Front to Back Ratio: | 27 dB |
| 3 dB Horizontal Beamwidth: | TBA° |
| Polarization: | Horizontal or Vertical |
| Nominal Input Impedance: | 50 Ohms |
| SWR Across Entire Band: | < 1.2 |
| Maximum Power Input: | More than 500 W, 1500 W available |
| Matching Method: | Direct feed through common mode balun |
| Input Connector: | “N” |
| Mechanical Specifications 2 m | |
| Number of elements: | 8 |
| Element Diameter: | 8 mm Aluminum tube |
| Dipole Diameter: | 8 mm Hard Copper tube |
| Longest element: | 1040 mm |
| Element Mounting Position: | Below the Boom |
| Balun and Connectors: | Included |
| Boom Length: | 2.92 m |
| Boom Size: | 30 x 30 mm |
| Number of Boom Pieces: | 2 |
| Guy rope support: | Not necessary. Strong boom |
| Mounting Mast Diameter | 43 – 70 mm 1-1/4″ – 2-3/4″ |
| Survival Wind Speed: | 150 km/h |
| Transportation Length: | 1.49 m |
| Antenna Net Weight: | 4.7 kg |
Click here to look up all 6 meter / 2 meter antennas: 6m / 2m antennas
Bruno –
Antenna easily assembled and now at the top of the tower.
First QSOs on 6 meter was on Tuesday with poor propagation but antenna works fine.
Good job !
Bruno – F5AGB