Higher Gain 6m 6elements DX Yagi Antenna 6m6DX6D

Low Noise higher gain 6m 6elements DX Yagi Antenna 6m6DX6D will make sure you can hear very weak signals and give you the extra edge you need in contests or just enjoy DXing.

New Es season has arrived. This 6 Elements 50 MHz Yagi antenna provides stunning performance across the DX band: 50 – 50.5 MHz.

 

6m 6elements DX Yagi Antenna 6m6DX6D

 

What does 6m6DX6D mean?

• 6m – 6m magic band antenna
• 6 – 6 elements
• DX – Intended for use in DX part of band 50-50.5MHz with excellent SWR
• 6 – More than 6m boom length
• D – Boom parts length up to 1.98m (DHL or TNT Economy transport)

 

Electrical Specifications of 6m 6elements DX Yagi Antenna 6m6DX6D

Frequency Range: 50 – 50.5 MHz
Free Space Forward Gain: 11.65 dBi
Front-to-Back Ratio: 32 dB
-3 dB Horizontal Beamwidth: 47°
Polarization: Horizontal
Nominal Input Impedance: 50 Ohms
SWR Across Entire Band: <1.2
Maximum Power Input: 1500 W
Matching Method: Direct feed through common mode choke (current balun)
Connector: “N” (7/16DIN by power request)

 

6m 6elements DX Yagi Antenna 6m6DX6D Azimuth Radiation Pattern

 

 

Mechanical specifications of 6m 6elements DX Yagi Antenna 6m6DX6D

Number of Elements: 6
Elements Diameter: Tapered elements. Center tube 12mm, extensions 10 and 8mm
Dipole Diameter: Tapered dipole. Center tube 12mm, extensions 10 and 8mm
Longest Element: 3.1 meter
Element Mounting Position: Below the boom
Balun and Connector: Included
Boom Length: 6.17 meter
Boom Size: Tapered boom. 40 x 40 mm, 30 x 30 mm, 20 x 20 mm
Turning Radius: 3.5 meter
Number of Boom Pieces: 4
Guy rope support: Yes, Included
Mounting Mast Diameter: 43 – 70 mm 1-11/16″ – 2-3/4″ OD
Clamp: 2 x M8 Stainless Steel
Survival Wind Speed: 150 km/h
Wind Load: 0.28 m2
Net Weight: 8.3 kg
Gross Weight: 9.7 kg
Transportation Length: 2 m

 

Horizontal Stacking distance for DX Yagi Antenna 6m6DX6D

6.9m Gain 14.5 dBi (+2.85dB)

 

Vertical Stacking distance for DX Yagi Antenna 6m6DX6D

6.1m Gain 14.55 dBi (+2.9dB)

 

6m 6elements DX Yagi Antenna 6m6DX6D appearance

 

Antennas-Amplifiers Product Benefits. A Major advance in Amateur Radio antenna design.

 

• F/B and G/T superiority.

All antennas have been calculated using state-of-the-art full 3D Electromagnetic Simulation Software including the influence of the boom, bracket, baluns, and connectors. The performance of antennas designed using these techniques is exceptional, far better than antennas designed using “wire” programs.
Comparison of EM simulation software

• No tuning antennas
  

Before dispatch, we assemble each antenna and test antenna characteristics. That means you may expect exceptionally good electrical and mechanical attributes including low SWR across the designed range immediately after assembling.
No need to tune the dipole, or any other element to get perfect SWR on the intended frequency range. Everything is pre-tuned.

• Easy to set up

Everything is labeled, just put number to number. The antenna can be assembled with hand tools in a couple of minutes.
Everything is included in the antenna box: Antenna, balun with connector, and bracket. Yours is to assemble and have fun!

The old name of the antenna was PA50-6-6DG

 

What others say about 6m6DX6D (PA50-6-6DG)

Erwin DK5EW
“The antenna was very well packed in a very hard cover so there was no damage due to transport.
Today I installed the antenna. The installation was very easy as you marked all parts perfectly in a way that a mistake is impossible.

The quality of the antenna material is great also the mechanical workmanship is fine. It took me about 1 hour to mount the antenna and another hour to install it on the tower.
The SWR is – as you promised – very low in the ordered frequency range.
Please find attached a picture of the antenna and an SWR plot I made with my VNA

 

73’s Erwin/DK5EW http://www.mmmonvhf.de/

 

Check all 6m antennas here