8m 6elements Antenna 8m6DX6

8m 6elements Antenna 8m6DX6


8m 6elements Antenna 8m6DX6

SKU: 0058 Category:

8m 6elements Antenna 8m6DX6 for ultimate DXing

The world’s first commercial 8m 6elements Antenna 8m6DX6 for the new ham radio band. Designed for 40.66-40.7MHz or 40-41MHz Wideband. With extremely sturdy construction.


What does 8m6DX6 mean?

8m – Band antenna 40.66-40.7MHz or 40-41MHz Wideband
6 – Elements
DX – Intended for use from 40.66-40.7MHz with excellent SWR
6 – About 6.3m boom with strong construction

Extra Low Noise High Gain 8m 6elements Yagi Antenna 8m6DX6 for ultimate DXing will make sure you can hear weak signals and give you the extra edge you need to enjoy the Ham Radio Hobby.


8m 6elements Antenna 8m6DX6 40.66-40.7MHz


8m6DX6 Electrical Specifications:

Frequency Range: 40.5-40.9MHz and 40-41MHz for receiving
Free Space Forward Gain: 10.9dBi
Front-to-Back Ratio: 26dB
3 dB Horizontal Beamwidth: 50.8°
Polarization: Horizontal
Nominal Input Impedance: 50 Ohms
SWR Across Entire Band: <1.2
Maximum Power Input: 1000W (more power by order)
Matching Method: Direct feed through common mode choke (current balun)
Connector: “N”


8m 6elements Antenna 8m6DX6 Balun and Label View

8m 6elements Antenna 8m6DX6 Balun and Label View


8m6DX6 Mechanical Specifications:

Number of Elements: 6
Element Diameter: 12 mm, extensions 10 mm and 8 mm
Dipole Diameter: 12 mm, extensions 10 mm and 8 mm
Longest Element: 3.75m
Element Mounting Position: Below the Boom
Balun and Connector: Included
Boom Length: 6.3m
Boom Size: Tapered boom: 40 x 40 mm, 30 x 30 mm, 20 x 20 mm
Number of Boom Pieces: 5
Guy rope support: Yes, Included
Mounting Mast Diameter: 43-70mm 1-11/16″ – 2-3/4″ OD, Stainless Steel
Clamp: M8 Stainless Steel
Survival Wind Speed: 150km/h
Net Weight: 8.6kg
Gross Weight: 10kg
Transportation Length: 1.5m


8m 6elements Antenna 8m6DX6 Azimuth Radiation Pattern


8m 6elements Antenna 8m6DX6 Azimuth Radiation Pattern


Look also at the other 8m antennas


Antennas-Amplifiers Product Benefits. A Major advance in Amateur Radio antenna design.


  • F/B and G/T superiority.
All antennas have been calculated using state-of-the-art full 3D Electromagnetic Simulation Software including the influence of the boom, bracket, baluns, and connectors. The performance of antennas designed using these techniques is exceptional, far better than antennas designed using “wire” programs.


  • No tuning antennas

Before dispatch, we assemble each antenna and test antenna characteristics. That means you may expect exceptionally good electrical and mechanical characteristics including low SWR across the designed range immediately after assembling.
No need to move or correct dipole length or tune any element to get perfect SWR on the intended frequency range. Everything is pre-tuned.


  • Easy to set up

Everything is labeled, just put number to number. The antenna can be assembled with hand tools in a couple of minutes.
Everything is included in the antenna box: Antenna, balun with connector, and bracket. Yours is just to assemble and have fun!

Check all 8m antennas



There are no reviews yet.

Be the first to review “8m 6elements Antenna 8m6DX6”