6m 50 – 52 MHz 200 W Super Low Loss Band-pass Filter

149,00 

Description

6m 200 W Extreme Low Loss Band Pass Filter

Transmitting 200 W 50 – 52 MHz band-pass filter for chasing DX-es sunk into the noise.

Low Insertion loss filter is excellent to be placed before any LNA to protect the receiver from HF transmitters in DX expeditions or in multi-multi environment. This BPF will suppress any harmonic on 100 MHz, 150 MHz and more.

As its attenuation is only 0.11 dB, and the possible maximum output power is 200 W, this bandpass filter is ideal for both reception and transmission.

External appearance of the filter:

6m-200W-Ultimate-Super-Low-Loss-Bandpass-0.11dB-BPF-50-52MHz

By order outdoor mounting in our plastic box. For external assembly, send an e-mail with request.

The recorded data on the assembled filter with HP8753ES full 2-port calibrated are presented below.

Measured Return Loss (S11) and Insertion Loss (S21). Characteristics of 50 MHz Bandpass filter for up to 200 W transmitter.

6Meter-BPF-200W-0.1dB-Measurement

The measured SWR is between 1: 1.01 to 1: 1.04!

50-52MHz-BandPassFilter-200W-Transmitter-SWR-VSWR-Measurement

Achieved results on build Band-pass Filter (Attenuation)

HF Band

1.8 MHz 3.5 MHz 7 MHz 14 MHz 21 MHz 28 MHz
– 104 dB – 92 dB – 74 dB – 55 dB – 42 dB – 31 dB

Bandwidth: 50 – 51 MHz

50 MHz 50.11 MHz 50.3 MHz 51 MHz 52 MHz
– 0.11 dB – 0.11 dB – 0.11 dB – 0.11 dB – 0.11 dB

FM attenuation

88 MHz  98 MHz  100 MHz 104 MHz 108 MHz
– 18 dB – 24 dB – 25 dB – 27 dB – 29 dB

144 MHz / 222 MHz / 432 MHz Band Attenuation

144 MHz 148 MHz 222 MHz 432 MHz
– 41 dB – 42 dB – 54 dB  – 65 dB
These excellent results were achieved with supreme components and design of the filter. Band Pass filter will eliminate any harmonic emission from your 200 W linear amplifier.

Additional information

Weight 1.0 kg