Dual Band 6m 4m Wide Spaced Antenna 5070DX11W for Towers

Specially designed dual band 6m 4m wide spaced antenna 5070DX11W for towers. If you do not have enough space above the rotator cage, put this antenna below or on the side of the tower. Wide-spaced distance around the bracket of 1 meter will allow the tower to pass in between two middle elements.

New Es season has arrived. This dual-band 50MHz and 70MHz antenna will give you excellent DX and contest performance on both bands. Even on limited space.

 

Dual Band 6m 4m Wide Spaced Antenna 5070DX11W for Towers

 

What does 5070DX11W mean?

• 50 – 50MHz – 6m magic band antenna
• 70 – 70MHz – 4m band antenna
• DX – Intended for use in DX part of both bands 50-50.5MHz and 70-70.5 MHz with excellent SWR
• 11 – Overall 11 elements. 5el on 6m and 6+1 element on 4m band
• W – Wide-spaced antenna for towers

 

 

Extra power version of Dual Band Tower Antenna 5070DX11WE

“E” – Extra power 7/16 DIN Input connector 7mm SM250 Teflon balun cable: 2 x 2500W 5070DX11WE

Mechanical specifications of Dual Band 6m 4m Wide Spaced Antenna 5070DX11W on 6m band

Number of Elements: 5
Elements Diameter: 12 mm, extensions 10 mm and 8 mm
Dipole Diameter: 12 mm, extensions 10 mm and 8 mm
Longest Element: 3.1 meter
Balun and Connector: Included

 

Dual Band 6m 4m Wide Spaced Tower Antenna 5070DX11W

 

Electrical specifications of Dual Band 6m 4m Wide Spaced Tower Antenna 5070DX11W on 4m band

Frequency Range: 70-70.5 MHz
Free Space Forward Gain: 12 dBi
Front-to-Back Ratio: 25 dB
Polarization: Horizontal
Nominal Input Impedance: 50 Ohms
SWR Across Entire Band: < 1.2
Maximum Power Input: 1500W (2500W by order)
Matching Method: Direct feed through common mode choke (current balun) for both bands
Connector: “N” (7/16 DIN)

 

Mechanical specifications of Dual Band Tower Antenna 5070DX11W on 4m band

Number of Elements: 6+1
Elements Diameter: 12 mm, extensions 10 mm
Dipole Diameter: 12 mm, extensions 10 mm
Longest Element: 2.1 meter
Balun and Connector: Included

 

Common mechanical specifications of Dual Band Tower Antenna 5070DX11W

The overall number of elements: 11
Element Mounting Position: Below the boom
Boom Length: 5.48 meter
Boom Size: Tapered Boom 20×20, 30×30, 40x40mm
Turning Radius: 3m
Number of Boom Pieces: 5
Guy rope support: Yes, Included
Mounting Mast Diameter: 43 – 70 mm 1-11/16″ – 2-3/4″ OD
Clamp: 2x M8 Stainless Steel
Survival Wind Speed: 150 km/h
Net Weight: 8.5 kg
Gross Weight: 10 kg
Transportation Length: 1.2 meter

 

Antennas-Amplifiers Product Benefits. A Major advance in Amateur Radio antenna design.

 

• F/B and G/T superiority.

All antennas have been calculated using state-of-the-art full 3D Electromagnetic Simulation Software including the influence of the boom, bracket, baluns, and connectors. The performance of antennas designed using these techniques is exceptional, far better than antennas designed using “wire” programs.
Comparison of EM simulation software

• No tuning antennas
  

Before dispatch, we assemble each antenna and test antenna characteristics. That means you may expect exceptionally good electrical and mechanical attributes including low SWR across the designed range immediately after assembling.
No need to tune the dipole, or any other element to get perfect SWR on the intended frequency range. Everything is pre-tuned.

• Easy to set up

Everything is labeled, just put number to number. The antenna can be assembled with hand tools in a couple of minutes.
Everything is included in the antenna box: Antenna, balun with connector, and bracket. Yours is to assemble and have fun!

The old name of the antenna was PA5070-11-6AGWP

 

Check all DualBand 6m and 4m antennas