Dual Band EME – Terrestrial Yagi Antenna PA144-432-34-6-2CBGP Two separate antennas on the same boom. Behaves as two mono band antennas.
Extra High Gain 144 MHz and 432 MHz Dual Band Yagi antenna 11 elements on 144 MHz and 23 elements on 432 MHz.
Tropo – EME with stack of two or four antennas.
100 W will be enough to start work a lots of amateur around the world on two bands.
System with just two vertically stacked antennas (2.55m distance) could achieve about 17.35 dBi on 144 MHz and about 20.8 dBi on 432 MHz.
Save your space for another antennas.
PA144-432-34-6-2CBGP 144 MHz and 432 MHz Dual Band Antenna G/T on 144 MHz
PA144-432-34-6-2CBGP 144 MHz and 432 MHz-Dual Band Antenna G/T on 432 MHz
Dual-Band Antenna PA144-432-34-6-2CBGP Measured VSWR 144 MHz with calibrated HP8753ES Network Analyzer
Dual Band Antenna PA144-432-34-6-2CBGP Measured VSWR 432 MHz
| Electrical Specifications 2 meter | |
| Frequency Range: | 144 – 145 MHz |
| Free Space Forward Gain: | 15 dBi |
| Front to Back Ratio: | 27 dB |
| 3 dB Horizontal Beamwidth: | 33.6 ° |
| G/T | -3.54 |
| Polarization: | Horizontal |
| Nominal Input Impedance: | 50 Ohms |
| SWR Across Entire Band: | < 1.2 |
| Maximum Power Input: | 1.5 kW |
| Matching Method: | Direct feed through common mode RG142 Teflon choke (current balun) |
| Connector: | “N” |
| Mechanical Specifications 2 meter | |
| Boom Length: | 5.84 m |
| Boom Size: | Tapered Boom 30x30mm, 40x40mm |
| Number of Boom Pieces: | 3 – 4 |
| Element Diameter: | 8 mm Aluminum tube |
| Dipole Diameter: | 8 mm Hard Copper tube |
| Number of elements: | 11 |
| Longest element: | 1.03 m |
| Element Mounting Position: | Below the Boom |
| Guy rope support: | Yes |
| Mounting Mast Diameter: | 43 – 70 mm 1-11/16″ – 2-3/4″ OD |
| Survival Wind Speed: | 150 km/h |
| Transportation Length: | 1.5 m |
| Antenna Weight: | 9.5 kg |
| Electrical Specifications 70 cm | |
| Frequency Range: | 432 – 434 MHz |
| Free Space Forward Gain: | 17.8 dBi |
| Front to Back Ratio: | 27 dB |
| 3 dB Horizontal Beamwidth: | 22.8° |
| G/T | 5.28 |
| Polarization: | Horizontal |
| Nominal Input Impedance: | 50 Ohms |
| SWR Across Entire Band: | < 1.2 |
| Maximum Power Input: | 750 W |
| Matching Method: | Direct feed through common mode RG142 Teflon choke (current balun) |
| Connector: | “N” |
| Mechanical Specifications 70 cm | |
| Element Diameter: | 4 mm Aluminum rod |
| Dipole Diameter: | 8 mm Hard Copper tube |
| Number of elements: | 23 |
| Longest element: | 350 mm |
| Element Mounting Position: | Above the Boom |
Click here for 2 meter / 70 cm antennas: 2m/70cm antennas
Ken –
Keep up the great work you and your team are doing, fantastic products.
Company Antennas-amplifiers is the only manufacturer of VHF + UHF antennas I would use for build quality and performance.
Ken G0HOF