2m CROSS Antenna 2m20CROSSDX 20Elements

2m CROSS Antenna 2m20CROSSDX 20Elements

(1 customer review)

299,00 

The best Low Noise 2m CROSS Antenna 2m20CROSSDX 10+10 Elements. Perfect for VHF Contests or EME work

SKU: 0840 Categories: ,

10+10 Elements 2m CROSS Antenna 2m20CROSSDX 20Elements

The best Low Noise 2m CROSS Antenna 2m20CROSSDX 20Elements. Perfect for VHF Contest or EME work. Easy to change horizontal to vertical polarization.

 

2m CROSS Antenna 2m20CROSSDX 10+10 Elements

2m CROSS Antenna 2m20CROSSDX 20Elements

 

The best 10 + 10 elements 2m CROSS Antenna 2m20CROSSDX 20Elements with the highest possible gain for its length. Great for Terrestrial VHF Contest or EME work.

 

What does 2m20CROSSDX mean?

  • 2m 2m band
  • 2020 elements, 10 elements of horizontal polarization, and 10 elements of vertical polarization
  • CROSS – CROSS Yagi antenna has horizontal and vertical elements – separated on a single boom, the antenna is mounted in a “+” format.
  • DX – For use in the DX part of the band 144-145MHz.

 

Electrical Specifications of 2m CROSS Antenna 2m20CROSSDX 20Elements

Frequency Range: 144 – 145 MHz
Free Space Forward Gain: 14.4 dBi
Front-to-Back Ratio: 30 dB
-3 dB Horizontal Beamwidth: 36°
-3 dB Vertical Beamwidth: 39.6°
Polarization: Horizontal and Vertical (RHCP, LHCP with phase shift)
Distance Between Dipoles: 520mm
Degrees: 90°
Isolation Between Antennas: More than 30dB
Nominal Input Impedance: 50 Ohms
SWR Across Entire Band: <1.2
Maximum Power Input: 2 x 1500W
Matching Method: Direct feed through common mode choke (current balun)
Connectors: 2 x “N”

 

What about Orthogonality and related to that isolation between antennas (coupling) say SM5BSZ

“The NEC simulations above show that an isolation of 20 dB is sufficient. This means that the obvious way of checking a cross Yagi is to connect one of the feed lines to a transmitter with known output, and a power meter and a dummy load to the other. The attenuation is then measured directly through the power arriving at the dummy load. If it is below -20 dB compared to the transmitted power everything is fine. ”

Excellent results of isolation achieved -30 dB. Much better than SM5BSZ suggested:

 

Extra power version of 2m CROSS Antenna 2m20CROSSDX 20Elements

“E” – Extra power 7/16 DIN Input connector 7mm SM250 Teflon balun cable: 2 x 2000W 2m20CROSSDXE

 

The mechanical version of 2m CROSS Antenna 2m20CROSSDX 20Elements

“G”Guy rope support for extra safety and harsh environment 2m20CROSSDXG

 

2m CROSS Antenna 2m20CROSSDX 20Elements Azimuth Radiation Pattern

 

2m CROSS Antenna 2m20CROSSDX 20Elements Azimuth Radiation Pattern

 

Mechanical Specifications of 2m CROSS Antenna 2m20CROSSDX 20Elements

Number of Elements: 20 (10 + 10)
Element Diameter: 8mm Aluminum tube
Dipole Diameter: 8 mm Hard Copper tube plastic coated
Longest Element: 1040 mm
Element Mounting Position: CROSS antenna – 2 Sides
Balun and Connector: Included
Boom Length: 5.47 m
Single Antenna Length: 4.91m
Boom Size: Tapered Boom 40 x 40 mm, 30×30 mm
Turning Radius: 2 m
Number of Boom Pieces: 4
Guy rope support:  Not Necessary (by order)
Mounting Mast Diameter: 43 – 70 mm 1-11/16″ – 2-3/4″ OD
Clamp: 2 x M8 Stainless Steel
Survival Wind Speed: 150 km/h
Net Weight: 8.6kg
Transportation Length: 1.49 m

 

2m CROSS Antenna 2m20CROSSDX 20Elements. Two Antennas Gain Side by Side (Horizontal Stack) 3100 mm

Horizontal Antenna (polarization). Gain 17.3 dBi for F/S -13.1 dB
Vertical Antenna (polarization). Gain 17.45 dBi for F/S -11.4 dB

 

2m CROSS Antenna 2m20CROSSDX 20Elements. Two Antennas Gain for Vertical Stack 3100 mm

Horizontal Antenna (polarization). Gain 17.45 dBi for F/S -11.4 dB
Vertical Antenna (polarization). Gain 17.3 dBi for F/S -13.1 dB

 

2m CROSS Antenna 2m20CROSSDX 20Elements. Four Antennas Gain in “H” configuration 3100 x 3100 mm

Horizontal Polarization: Gain 20.35 dBi for F/S -12.7 dB
Vertical Polarization: Gain 20.35 dBi for F/S -11.4 dB

 

Excellent SWR on a built 2m CROSS Antenna 2m20CROSSDX 20Elements

2-meter-xpol-yagi-vhf-terrestrial-contest-eme-antenna-excellent-swr-measure-first-antenna

 

Antennas-Amplifiers Product Benefits. A Major advance in Amateur Radio antenna design.

 

  • F/B and G/T superiority.

All antennas have been calculated using state-of-the-art full 3D Electromagnetic Simulation Software including the influence of the boom, bracket, baluns, and connectors. The performance of antennas designed using these techniques is exceptional, far better than antennas designed using “wire” programs.
Comparison of EM simulation software

  • No tuning antennas

Before dispatch, we assemble each antenna and test antenna characteristics. That means you may expect excellent electrical and mechanical attributes including low SWR across the designed range immediately after assembling.
No need to tune the dipole, or any other element to get perfect SWR on the intended frequency range. Everything is pre-tuned.

  • Easy to set up

Everything is labeled, just put number to number. The antenna can be assembled with hand tools in a couple of minutes.
Everything is included in the antenna box: Antenna, balun with connector, and bracket. Yours is to assemble and have fun!

The old name of the antenna was PA144-CROSS-20-6BP

 

For the XPOL variant of the same antenna look here.

Check all 2m CROSS antennas

All 2m antennas: 2-meter antennas

2m XPOL antennas

 

Weight 9,1 kg
Dimensions 149 × 17 × 16 cm

1 review for 2m CROSS Antenna 2m20CROSSDX 20Elements

  1. Peter

    These antennas are the most durable antennas I have ever had.
    I have set them up more than 100 times in portable operations.
    Peter KA6U

Add a review