2m EME XPOL Yagi Antenna 2m28XPOL

2m EME XPOL Yagi Antenna 2m28XPOL

439,00 

2m EME XPOL Yagi Antenna 2m28XPOL 2 x 14 Elements

SKU: 1010 Category:

2m EME XPOL Yagi Antenna 2m28XPOL with Exceptionally Good G/T

Ultimate gain and perfect G/T of -0.79 dB for super weak EME signals key features of this 2m EME XPOL Yagi Antenna 2m28XPOL with 2 x 14 elements. Highest possible suppression of all side lobes. Easy to work many EME stations with just 100W. Four antennas in the stack are the recipe to win any EME contest including ARRL EME, DUBUS EME, or A.R.I. EME

 

2m EME XPOL Yagi Antenna 2m28XPOL

 

What does 2m28XPOL mean?

  • 2m – 2m band
  • 28 – 28 elements 14 + 14
  • XPOL – XPOL Antenna has 2 sets of elements oriented in an “X” format. One set of elements is +45 degrees to the Earth, the other -45 degrees.

 

Electrical Specifications of 2m EME XPOL Yagi Antenna 2m28XPOL

Frequency Range: 144 – 145 MHz
Free Space Forward Gain: 16.4 dBi
Front-to-Back Ratio: 35 dB
3 dB Horizontal Beamwidth: 28.4°
G/T: -0.79 dB
Polarization: Horizontal, Vertical, RHCP, LHCP with phase shift
Distance Between Dipoles: 520 mm
Degrees: 90°
Nominal Input Impedance: 50 Ohms
SWR Across Entire Band: < 1.2
Maximum Power Input: 3000 W for both antennas
Matching Method: Direct feed through common mode choke (current balun)
Connectors: 2 x “N”

 

Mechanical Specifications of 2m EME XPOL Yagi Antenna 2m28XPOL

Number of Elements: 28 (14 + 14)
Element Diameter: 8 mm Aluminum tube
Dipole Diameter: 8 mm Hard Copper tube plastic coated
Longest Element: 1040 mm
Element Mounting Position: Above the Boom. Slant configuration +-45°
Balun and Connectors: Included
Boom Length: 9.35 m
Single Antenna Length: 8.82 m
Boom Size: Tapered Boom 40×40 mm, 30×30 mm, 20×20 mm
Number of Boom Pieces: 7
Guy rope support: Yes, Included
Mounting Mast Diameter: 43 – 70 mm 1-11/16″ – 2-3/4″ OD
Clamp: M8 Stainless Steel
Survival Wind Speed: 150 km/h
Net Weight: 13 kg
Gross Weight: 15 kg
Transportation Length: 1.5 m

 

TANT G/T -0.79:

144 MHz XPOL Antenna PA144-XPOL-28-9BGP TANT G/T-079

 

Look at the famous VE7BQH table:

Press “VE7BQH 144 MHz Tables” ROW 256 and 257. Or search “PA144”

2m28XPOL (PA144-XPOL-28-9BGP) is one of the best-performing antennas on the table for its size.

2m28XPOL Measured SWR 144 – 145 MHz at antenna connector:

SWR measurements PA144-XPOL-28-9BGP Antenna 144-145MHz

 

Antennas-Amplifiers Product Benefits. A Major advance in Amateur Radio antenna design.

 

  • F/B and G/T superiority.

All antennas have been calculated using state-of-the-art full 3D Electromagnetic Simulation Software including the influence of the boom, bracket, baluns, and connectors. The performance of antennas designed using these techniques is exceptional, far better than antennas designed using “wire” programs.
Comparison of EM simulation software

  • No tuning antennas

Before dispatch, we assemble each antenna and test antenna characteristics. That means you may expect excellent electrical and mechanical attributes including low SWR across the designed range immediately after assembling.
No need to tune the dipole, or any other element to get perfect SWR on the intended frequency range. Everything is pre-tuned.

  • Easy to set up

Everything is labeled, just put number to number. The antenna can be assembled with hand tools in a couple of minutes.
Everything is included in the antenna box: Antenna, balun with connector, and bracket. Yours is to assemble and have fun!

The old name of the antenna was PA144-XPOL-28-9BGP

All 2m antennas
2m CROSS antennas
2m XPOL antennas

 

Weight 15,3 kg
Dimensions 149 × 19 × 18 cm

Reviews

There are no reviews yet.

Be the first to review “2m EME XPOL Yagi Antenna 2m28XPOL”