4m 8elements Antenna 4m8DXB for Ultimate DXing
Super low noise designed 4m 8 elements Antenna 4m8DXB with Top Notch Performance. 8 elements on about 7m boom will ensure that you will be always the first.
What does 4m8DXB mean?
4m – 4m band 70-70MHz antenna
8 – Elements
DX – Intended for use for DXing
B – Boom parts up to 146cm
4m 8 elements Antenna 4m8DXB DX Yagi antenna appearance:
Electrical specifications of 4m8DXB:
Frequency Range: 70 – 70.5 MHz
Free Space Forward Gain: 13dBi
Front-to-Back Ratio: 31dB
3 dB Horizontal Beam-width: 41°
Nominal Input Impedance: 50 Ohm
SWR Across Entire Band: < 1.2
Maximum Power Input: 1500W (more by order)
Matching Method: Direct feed through common mode choke (current balun)
Connector: “N” (7/16DIN by order)
Maximum Power Input options by order for 4m8DXB Yagi antenna
“E” 7/16 DIN Input connector SF250 Teflon balun cable. Max power 3500 W (4m8DXBE)
“EX” 7/16 DIN Input connector RG115 Teflon balun cable. Max power 8000 W (4m8DXBEX)
Mechanical specifications of 4m8DXB Yagi antenna
Number of Elements: 8
Elements Diameter: Tapered elements. Center tube 12mm, extensions 10mm
Dipole Diameter: Tapered dipole. Center tube 12mm, extensions 10mm
Longest Element: 2.2 meter
Element Mounting Position: Below the boom
Balun and Connector: Included
Boom Length: 6.87 meter
Boom Size: Tapered boom. 40x40mm, 30x30mm, 20x20mm
Turning Radius: 3.9m
Number of Boom Pieces: 5
Guy rope support: Yes, Included
Mounting Mast Diameter: 43 – 70 mm 1-11/16″ – 2-3/4″ OD
Clamp: M8 Stainless Steel
Survival Wind Speed: 150 km/h
Net Weight: 9.2 kg
Gross Weight: 11 kg
Transportation Length: 1.5 meter
4meter 8elements super Yagi antenna 4m8DXB radiation pattern with extremely low side lobes
4m 8elements Yagi Antenna 4m8DXB measured SWR:
Antennas-Amplifiers Product Benefits. A Major advance in Amateur Radio antenna design.
- F/B and G/T superiority.
All antennas have been calculated using state-of-the-art full 3D Electromagnetic Simulation Software including the influence of the boom, bracket, baluns, and connectors. The performance of antennas designed using these techniques is exceptional, far better than antennas designed using “wire” programs.
- No tuning antennas
Before dispatch, we assemble each antenna and test antenna characteristics. That means you may expect exceptionally good electrical and mechanical characteristics including low SWR across the designed range immediately after assembling.
No need to tune the dipole, or any other element to get perfect SWR on the intended frequency range. Everything is pre-tuned.
- Easy to set up
Everything is labeled, just put number to number. The antenna can be assembled with hand tools in a couple of minutes.
Everything is included in the antenna box: Antenna, balun with connector, and bracket. Yours is just to assemble and have fun!
The old name of the antenna was PA70-8-7BGP
Look also at all 4m antennas