DualBand 6m 2m Antenna 6m2DX14-2Conn for serious DXing

Excellent DualBand 6m 2m Antenna 6m2DX14-2Conn two separate connectors for limited space. Good for chasing DXes. Even EME is possible on both bands. 50MHz and 144 MHz. If you have an HF antenna on the tower and just 2m more pipe, this antenna is the right choice to expand to two more bands.

 

What does 6m2DX14-2Conn mean?

• 6m – Covers 50-50.5MHz frequency range
• 2 – Covers 144-145MHz frequency range
• DX – Intended for use on DX parts of the bands
• 14 – Overal number of elements 14
• 2Conn – Two separate connectors. One for 6m and the second for 2m

 

 

Dualband 6m2DX14-2Conn 6m Electrical Specifications:

Frequency Range: 50-50.5MHz
Free Space Forward Gain: 10.2dBi
Front-to-Back Ratio: 26dB
-3 dB Horizontal Beamwidth: 53.5°
Polarization: Horizontal
Nominal Input Impedance: 50 Ohms
SWR Across Entire Band: <1.2
Maximum Power Input: 1000W (By order 1500W “Power” version)
Matching Method: Direct feed through common mode choke (current balun)
Connector: “N”

 

DualBand 6m-2m Antenna 6m2DX14-2Conn 6m Excellent Clean Azimuth Radiation Pattern

 

DualBand 6m2DX14-2Conn 2m Electrical Specifications:

Frequency Range: 144-145MHz
Free Space Forward Gain: 13.2dBi
Front-to-Back Ratio: 27dB
-3 dB Horizontal Beamwidth: 38.2°
Polarization: Horizontal
Nominal Input Impedance: 50 Ohms
SWR Across Entire Band: <1.2
Maximum Power Input: More than 500W (By order 1500W “Power” version)
Matching Method: Direct feed through common mode choke (current balun)
Connector: “N”

 

DualBand 6m-2m Antenna 6m2DX14-2Conn 2m Azimuth Radiation Pattern

 

6m2DX14-2Conn 6m Mechanical Specifications:

Number of Elements: 5
Element Diameter: Tapered elements. Center tube 12mm, extensions 10 and 8mm
Dipole Diameter: Tapered dipole. Center tube 12mm, extensions 10 and 8mm
Longest Element: 3.1 m
Element Mounting Position: Below the boom
Balun and Connector: Included

 

DualBand Antenna 6m2DX14-2Conn 2m Mechanical Specifications:

Number of Elements: 9
Element Diameter: 8 mm Aluminum tube
Dipole Diameter: 8 mm Hard Copper tube plastic coated
Longest Element: 1030 mm
Element Mounting Position: Above the Boom
Balun and Connector: Included

 

DualBand 6m-2m Antenna 6m2DX14-2Conn Two Connectors

 

Common mechanical characteristics of DualBand Antenna 6m2DX14-2Conn

Boom Length: 4.26 m
Boom Size: Tapered Boom 40×40 mm, 30×30 mm
Turning Radius: 2.7m
Number of Boom Pieces: 3
Guy rope support: Not necessary. Strong boom
Mounting Mast Diameter: 43 – 70 mm 1-11/16″ – 2-3/4″ OD
Clamp: 2 x M8 Stainless Steel
Survival Wind Speed: 150 km/h
Net Weight:  kg
Gross Weight:  kg
Transportation Length: 1.5 m

 

Antennas-Amplifiers Product Benefits. A Major advance in Amateur Radio antenna design.

 

• F/B and G/T superiority.

All antennas have been calculated using state-of-the-art full 3D Electromagnetic Simulation Software including the influence of the boom, bracket, baluns, and connectors. The performance of antennas designed using these techniques is exceptional, far better than antennas designed using “wire” programs.

• No tuning antennas
  

Before dispatch, we assemble each antenna and test antenna characteristics. That means you may expect exceptionally good electrical and mechanical attributes including low SWR across the designed range immediately after assembling.
No need to tune the dipole, or any other element to get perfect SWR on the intended frequency range. Everything is pre-tuned.

• Easy to set up

Everything is labeled, just put number to number. The antenna can be assembled with hand tools in a couple of minutes.
Everything is included in the antenna box: Antenna, balun with connector, and bracket. Yours is just to assemble and have fun!

 

Check all DualBand 6m 2m Antennas