6m 2elements Antenna 6m2DX1

6m 2elements Antenna 6m2DX1


6m 2elements Antenna 6m2DX1 for portable locations

SKU: 0100 Category:

Light Weight 6m 2elements Antenna 6m2DX1

Small light 6m 2elements antenna 6m2DX1 will do the job on portable locations or on a fixed location as a secondary antenna with fast relay switching. Light construction is good enough to put on a “TV rotator” to choose directions. The average assembly time on portable locations is 3 minutes.

The antenna has the widest possible azimuth radiation pattern. No need to turn on a certain direction every time.


6m 2elements Antenna 6m2DX1 Light Construction

6m 2elements Antenna 6m2DX1


What does 6m2DX1 mean?

  • 6m – 6m portable Yagi antenna
  • 2 2 elements
  • DX – Intended for use in DX part of band 50-50.5MHz with excellent SWR
  • 1 – About 1.1m boom length


Electrical Specifications of 6m 2elements Antenna 6m2DX1

Frequency Range: 50 – 50.5 MHz
Free Space Forward Gain: 6.3 dBi
Front-to-Back Ratio: 10 dB
-3 dB Horizontal Beamwidth: 68.4°
Polarization: Horizontal
Nominal Input Impedance: 50 Ohms
SWR Across Entire Band: <1.2
Maximum Power Input: 1000 W
Matching Method: Direct feed through common mode choke (current balun)
Connector: “N”


Maximum Power Input options by order for 6m 2elements Antenna 6m2DX1

“P”Power version “N” Input connector RG142 5mm Teflon balun cable: 1500W 6m2DX1P
“E”Extra power 7/16 DIN Input connector 7mm SM250 Teflon balun cable: 2500W 6m2DX1E
“EX”EXtreme power 7/16 DIN Input connector 10mm RG115 Teflon balun cable: 8000W 6m2DX1EX


Mechanical specifications of 6m 2elements Antenna 6m2DX1

Number of Elements: 2
Elements Diameter: Tapered elements. Center tube 12mm, extensions 10 and 8mm
Dipole Diameter: Tapered dipole. Center tube 12mm, extensions 10 and 8mm
Longest Element: 3.1 meter
Element Mounting Position: Below the boom
Balun and Connector: Included
Boom Length: 1.1 meter
Boom Size: 20 x 20 mm
Turning Radius: 1.8 meter
Number of Boom Pieces: 1
Guy rope support: Not necessary. Strong boom
Mounting Mast Diameter: 30 – 50 mm 1-1/4 – 2″ OD
Clamp: M8 Stainless Steel
Survival Wind Speed: 150 km/h
Net Weight: 1.1 kg
Gross Weight: 2.5 kg
Transportation Length: 1.2 m


6m Antenna 6m2DX1 Dipole and Balun View

6m 2elements Antenna 6m2DX1 Dipole and Balun View


Vertical stacking distance of two 6m 2elements Antenna 6m2DX1

2.75 m Gain 9.3 dBi, F/B 18.6 dB (+3 dB)
3.2 m Gain 9.8 dBi, F/B 21.6 dB (Max F/B) (+3.5 dB)
3.5 m Gain 10 dBi, F/B 16 dB (+3.7 dB)


Vertical stacking distance of four 6m2DX1

2.55 m Gain 12.1 dBi, F/B 17 dB (+5.8 dB)
2.7 m Gain 12.3 dBi, F/B 19 dB (+6 dB)
2.95 m Gain 12.6 dBi, F/B 25 dB (+6.3 dB)
3.2 m Gain 12.9 dBi, F/B 26 dB (+6.6 dB)


Antennas-Amplifiers Product Benefits. A Major advance in Amateur Radio antenna design.


  • F/B and G/T superiority.

All antennas have been calculated using state-of-the-art full 3D Electromagnetic Simulation Software including the influence of the boom, bracket, baluns, and connectors. The performance of antennas designed using these techniques is exceptional, far better than antennas designed using “wire” programs.
Comparison of EM simulation software

  • No tuning antennas

Before dispatch, we assemble each antenna and test antenna characteristics. That means you may expect exceptionally good electrical and mechanical attributes including low SWR across the designed range immediately after assembling.
No need to tune the dipole, or any other element to get perfect SWR on the intended frequency range. Everything is pre-tuned.

  • Easy to set up

Everything is labeled, just put number to number. The antenna can be assembled with hand tools in a couple of minutes.
Everything is included in the antenna box: Antenna, balun with connector, and bracket. Yours is to assemble and have fun!

The old name of the antenna was PA50-2-1A


Check all 6m antennas here


Additional information

Weight 2,5 kg
Dimensions 119 × 11 × 10 cm


There are no reviews yet.

Be the first to review “6m 2elements Antenna 6m2DX1”