No products in the cart.
Strong 3 Element 50 MHz 6m Antenna: PA50-3-1.5B
Strong and sturdy 50 MHz Yagi antenna designed to withstand high winds. Its 30 x 30 mm boom with “Goliath” bracket will makes sure the antenna is always solid. 3 elements on the 6 meter band allow wide azimuth radiation pattern.
Everything is included in the antenna box: Antenna, balun with connector and bracket. 50 MHz Ham Radio Yagi is perfect for field days since its very easy to assemble. 10 minutes is sufficient. All antenna parts are labeled, so it is extreme easy to assemble. Just put number to number.
Antenna is pre-tuned, so no need to move, cut or use rasp file for any element to get perfect SWR on intended frequency range. A short boom, wide-band 3 element antenna cover the entire DX band with SWR <1.2 from 50 MHz to 50.5 MHz.
Elements are tapered to reduce vibrations at high winds. Boom is just 1.46 meter long. Since this Ham Radio antenna has 3 elements it very easy to set up. Antenna is very good for field day since it is light-weight or permanent setup since antenna is very sturdy. Starting element diameter is 12 mm, middle part 10mm and 8mm ends. Tapered elements will reduce the wind-load. This Ham Radio antenna has wide azimuth radiation pattern. 50 MHz 3 element is good for vertical stacking in permanent setup since this wide angle allows listening to Ham Radio stations without frequent rotator movement. It is good for E-sporadic season since when there is an opening you don’t need long antennas.
Default maximum power input is 1000 W. Antenna does not have power limit, only limitations are in used balun and antenna connector. Optional up to 8000 W.
Enjoy the rising popularity and exciting contacts on the 6 meter band.
PA50-3-1.5B Ham Radio antenna appearance:
Electrical and Mechanical specifications of PA50-3-1.5B
Electrical specifications of 6 meter 3 element Yagi:
|Electrical Specifications||PA50-3-1.5B Antenna|
|Frequency Range:||50 – 50.5 MHz|
|Free Space Forward Gain:||7 dBi|
|Front to Back Ratio:||21 dB|
|3 dB Horizontal Beam-width:||66.2°|
|Nominal Input Impedance:||50 Ohm|
|SWR Across Entire Band:||< 1.2|
|Maximum Power Input:||1000 W (or more by request)|
|Matching Method:||Direct feed through common mode choke (current balun)|
|Connector:||“N” default (SO 239 or 7/16 DIN by request)|
Mechanical specifications of 50 MHz 3 element antenna:
|Number of Elements:||3|
|Elements Diameter:||12 mm, extensions 10 mm and 8 mm|
|Dipole Diameter:||12 mm, extensions 10 mm and 8 mm|
|Longest Element:||3.1 meter|
|Element Mounting Position:||Below the boom|
|Balun and Connector:||Included|
|Boom Length:||1.46 meter|
|Boom Size:||30 x 30 mm|
|Turning Radius:||1.8 meter|
|Number of Boom Pieces:||1|
|Guy rope support:||Not necessary. Strong boom.|
|Mounting Mast Diameter:||43 – 70 mm 1-11/16″ – 2-3/4″ OD|
|Clamp:||M8 Stainless Steel|
|Survival Wind Speed:||160 km/h|
|Net Weight:||1.7 kg|
|Gross Weight:||2.9 kg|
|Transportation Length:||1.49 meter|
3 elements 6 meter Permanent / Portable Yagi Antenna PA50-3-1.5B Azimuth Radiation Pattern
Antenna stacking for more gain can be found in the following table. All the calculations were done in the professional full 3-D EM software.
Vertical stacking of two antennas:
|Distance – 2 Antennas||Gain||F/B||Result:|
|2.7 m||9.8 dBi||25 dB||+2.8 dB|
|2.9 m||10 dBi||24||+3 dB|
|3.25 m||10.3 dBi||20 dB||+3.3 dB|
Vertical stacking of four antennas:
|Distance – 4 Antennas||Gain||F/B||Result:|
|2.7 m||12.8 dBi||23 dB||+5.8 dB|
|2.9 m||13 dBi||22 dB||+6 dB|
|3.1 m||13.2 dBi||21 dB||+6.2 dB|
|3.25 m||13.3 dBi||19 dB||+6.3 dB|
We offer 3 elements Rear mount antenna on 50 MHz. Direct link is here: 6 Meter 3 Element Rear Mount Yagi
Click here for our full 6 meter antenna offer: 6 meter antennas
|Dimensions||149 × 11 × 10 cm|