Lightweight 70cm DX Yagi Antenna 70cm14DX3
Good for portable or stationary use. Excellent for DXing. Possible EME with just 50W and a single antenna.
A strong 30 x 30mm boom will ensure stable mechanical characteristics on any wind.
What does 70cm14DX3 mean?
70cm – 70cm band
14 – 14 elements
DX – The best performance on DX part of band 432 to 434 MHz for contesting or EME
3 – About 3m long boom
70cm14DX3 Electrical Specifications:
Frequency Range: 432 – 434MHz
Free Space Forward Gain: 16.4dBi
Front-to-Back Ratio: 27dB
3 dB Horizontal Beamwidth: 30.5°
3 dB Vertical Beamwidth: 32.4°
Nominal Input Impedance: 50 Ohms
SWR Across Entire Band: <1.2
Maximum Power Input: 850W
Matching Method: Direct feed through RG142 common mode choke (current balun)
70cm14DX3 Mechanical Specifications:
Number of Elements: 14
Element Diameter: 4 mm Aluminum rod
Dipole Diameter: 8 mm Hard Copper tube plastic coated
Longest Element: 340 mm
Element Mounting Position: Below the Boom
Balun and Connector: Included
Boom Length: 2.92m
Boom Size: 30x30mm
Number of Boom Pieces: 2
Guy rope support: Not necessary. Strong boom
Mounting Mast Diameter: 43-70mm 1-11/16″ – 2-3/4″ OD
Clamp: M8 Stainless Steel
Survival Wind Speed: 180km/h
Wind Load: 0.08m2
Net Weight: 2.5kg
Gross Weight: 4.5kg
Transportation Length: 1.5m
Four antennas 1300 mm for F/S< -12.8 dB, Gain: 22 dBi
Eight antennas 1320 mm for F/S< -13.1 dB, Gain: 25 dBi
Two antennas 1220 mm for F/S< -12.5 dB, Gain: 19.04 dBi
Four antennas 1230 mm for F/S< -12.6 dB, Gain: 22 dBi
Eight antennas 1240 mm for F/S< -13.2 dB, Gain: 25 dBi
Antennas-Amplifiers Product Benefits. A Major advance in Amateur Radio antenna design.
- F/B and G/T superiority.
- No tuning antennas
Before dispatch, we assemble each antenna and test antenna characteristics. That means you may expect exceptionally good electrical and mechanical characteristics including low SWR across the designed range immediately after assembling.
No need to move the dipole, cut, or tune any element to get perfect SWR on the intended frequency range. Everything is pre-tuned.
- Easy to set up
Everything is labeled, just put number to number. The antenna can be assembled with hand tools in a couple of minutes.
Everything is included in the antenna box: Antenna, balun with connector, and bracket. Yours is just to assemble and have fun!
The old name of the antenna was PA432-14-3B.
There are no reviews yet.