40m 2elements Antenna 40m2DXHD

40m 2elements Antenna 40m2DXHD

1.649,00 

Wideband 40m 2elements Antenna 40m2DXHD for DXing and Contesting

SKU: 3210 Category:

Heavy Duty 40m 2 elements Antenna 40m2DXHD

Wideband full size 40m 2elements Antenna 40m2DXHD for high winds locations for DXing and contesting. Strong elements and boom. The starting diameter of elements is 48 mm. Boom size 80 x 80mm.

Put the antenna as high as possible. Recommended is at least 20m AGL for super signals to Europe, JA, W, or VK. Compared to a dipole or any vertical antenna, this Yagi is much quieter and has “low noise”. Much less QRM in all other directions except the main direction.

 

40m 2elements Antenna 40m2DXHD for high winds locations for DXing and contesting

40m 2elements Antenna 40m2DXHD for high winds locations

 

What does 40m2DXHD mean?

  • 40m – 40m full-size wideband antenna
  • 2 2 elements
  • DX – Intended for use for DXing and contesting
  • HDHeavy Duty construction of boom and elements

 

Electrical Specifications of 40m 2 elements Antenna 40m2DXHD for DXing and contesting

Frequency Range: 7 – 7.2 MHz
Free Space Forward Gain: 6.2 dBi
Forward Gain 20m AGL: 11 dBi
Front-to-Back Ratio: 11 dB
-3 dB Horizontal Beamwidth: 69°
Polarization: Horizontal
Nominal Input Impedance: 50 Ohms
SWR Across Entire Band: <1.5
Maximum Power Input: 2500 W or more
Matching Method: Direct feed through common mode choke (current balun)
Connector: Silver-plated Teflon SO239 or 7/16DIN

 

40m 7MHz Wideband 2elements Beam 40m2DXHD for DXing and contesting

40m 7MHz 2elements Beam 40m2DXHD

 

Mechanical specifications of 40m 2 elements Antenna 40m2DXHD

Number of Elements: 2
Elements Diameter: Tapered elements. Center tube 48mm, extensions up to 8mm
Dipole Diameter: Tapered dipole. Center tube 48mm, extensions up to 8mm
Longest Element: 23 meter
Element Mounting Position: Below the boom
Balun and Connector: Included
Boom Length: 6 m
Boom Size: 80 x 80 x 3mm
Turning Radius: 13 meter
Number of Boom Pieces: 2 or 3
Guy rope support: Yes, Included for boom and elements. All Stainless Steel
Mounting Mast Diameter: 60 – 70mm standard. Up to 700mm by order for rotary towers
Clamp: 3 x M12 Stainless Steel
Survival Wind Speed: 130 km/h
Wind Load: 1.3 m2
Net Weight: 75 kg
Gross Weight: 82 kg
Transportation Length: 2m or 3m

 

40m 7MHz 2elements Antenna Bracket View 40m2DXHD

40m 7MHz 2elements Antenna Bracket View 40m2DXHD

 

40m 7MHz 2elements Yagi Antenna 40m2DXHD for DXing and contesting

40m 7MHz 2elements Yagi Antenna 40m2DXHD

 

Antennas-Amplifiers Product Benefits. A Major advance in Amateur Radio antenna design.

 

  • F/B and G/T superiority.

All antennas have been calculated using state-of-the-art full 3D Electromagnetic Simulation Software including the influence of the boom, bracket, baluns, and connectors. The performance of antennas designed using these techniques is exceptional, far better than antennas designed using “wire” programs.
Comparison of EM simulation software

  • No tuning antennas

Before dispatch, we assemble each antenna and test antenna characteristics. That means you may expect exceptionally good electrical and mechanical attributes including low SWR across the designed range immediately after assembling.
No need to tune the dipole, or any other element to get perfect SWR on the intended frequency range. Everything is pre-tuned.

  • Easy to set up

Everything is labeled, just put number to number. The antenna can be assembled with hand tools.
Everything is included in the antenna box: Antenna, balun with connector, and bracket. Yours is to assemble and have fun!

The old name of the antenna was PA7-2-6HD

 

Check all HF Antennas

 

Weight 75,00 kg

Reviews

There are no reviews yet.

Be the first to review “40m 2elements Antenna 40m2DXHD”