Low Noise 23cm Yagi Antenna 29elements 23cm29DXP

Light stationary and portable Low Noise 23cm Yagi Antenna 29elements 23cm29DXP. When designing, special attention was paid to achieving maximum gain and low noise with high suppression of all side lobes. 29 elements are the exact number for boom length up to 2 x 118 cm (airplane check baggage length). For easy transport. Antennas come completely assembled. Just to join two boom parts and you could be ready in less than 5 minutes. Excellent stack antenna for DXing or portable EME.

 

23cm Yagi Antenna 29elements 23cm29DXP

 

What does 23cm29DXP mean?

• 23cm – Frequency range from 1290 to 1310 MHz with low SWR
• 29 – Elements
• DX– For use in the DX part of the band
• P – Power version up to 300W

 

Electrical Specifications of 23cm Yagi Antenna 29elements 23cm29DXP

Frequency Range: 1290 – 1310 MHz
Free Space Forward Gain: 19.3 dBi
Front-to-Back Ratio: 35 dB
-3 dB Horizontal Beam-width: 21.2°
-3 dB Vertical Beam-width: 21.7°
Polarization: Horizontal
Nominal Input Impedance: 50 Ohms
SWR Across Entire Band: < 1.2
Maximum Power Input: 300 W
Matching Method: Voltage balun. UT141 or similar Teflon cable
Connector: “N”

 

23cm Yagi Antenna 29elements 23cm29DXP Azimuth Radiation Pattern

 

Mechanical Specifications of 23cm Yagi Antenna 29elements 23cm29DXP

Number of Elements: 29
Element Diameter: 4 mm Aluminum rod
Dipole Diameter: 3 mm Copper
Longest Element: 120 mm
Element Mounting Position: Above the boom
Balun and Connectors: Included
Boom Length: 2.36 m
Boom Size: 20×20 mm
The number of Boom Pieces: 2
Mounting Mast Diameter: 30 – 50 mm 1-1/4″ – 2″ OD
Clamp: M8 Stainless Steel
Survival Wind Speed: 150 km/h
Net Weight: 1.4 kg
Gross Weight: 3.2 kg
Transportation Length: 1.2 m

 

23cm Yagi Antenna 23cm29DXP Dipole Label

 

23cm Low Noise Yagi Antenna 29elements 23cm29DXP

 

Antennas-Amplifiers Product Benefits. A Major advance in antenna design.

• F/B and G/T superiority.

All antennas have been calculated using state-of-the-art full 3D EM modeling software including the influence of the boom, bracket, baluns, and connectors. The performance of antennas designed using these techniques is exceptional, far better than antennas designed using the EZNEC program.

• No tuning antennas.

Before dispatch, we assemble and test each antenna’s characteristics. No need to tune any element to get perfect SWR on the intended frequency range. Everything is pre-tuned.

• Easy to set up.

Everything is labeled, just put number to number. Everything is included in the box: Antenna, balun, bracket, and guy rope support if needed. Yours is to assemble and have fun!

• Mechanical properties.

We believe that our antennas are the world’s strongest antennas and are mechanically constructed much better than any antennas from other manufacturers.

 

Look at another 23cm antennas