2m 6Element Rear Mount Antenna 2m6WAR

2m 6Element Rear Mount Antenna 2m6WAR


2m 6Element Rear Mount Antenna 2m6WAR. Versions 144-145MHz 144-146MHz or 144148MHz

SKU: 0560 Categories: ,

Wideband 2m 6Element Rear Mount Antenna 2m6WAR

High gain 2meter boom 2m 6Element Rear Mount Antenna 2m6WAR. Excellent to put on the side of the tower or balcony

All possible variations of frequencies, power ratings, and mechanical constructions. With the included “RA” bracket in a “second” it is possible to change the polarization from horizontal to vertical.


What does 2m6WAR mean?

  • 2m – 2m band
  • 6 – 6 elements
  • W – Wideband version covers 144-146 MHz
  • A – Boom parts less than 1.2m
  • RRear mount antenna


2m 6Element Rear Mount Antenna 2m6WAR


2m6WAR could be produced in three versions:

  • 2m6DXR for the DX part of the band 144-145MHz. Excellent for 2m contests as stack antenna with wide azimuth angle
  • 2m6WAR wideband version 144-146MHz horizontal or vertical polarization
  • 2m6WideR extra wideband version with 4MHz bandwidth 144-148MHz Region 2


Electrical Specifications of 2m 6Element Rear Mount Antenna 2m6WAR

Frequency Range: 144 – 146 MHz
Free Space Forward Gain: 10.95 dBi
Front-to-Back Ratio: 23 dB
-3 dB Horizontal Beamwidth: 48.2°
Polarization: Horizontal or Vertical
Nominal Input Impedance: 50 Ohms
SWR Across Entire Band: < 1.2
Maximum Power Input: 500W (By order “P” Power version 1500W)
Matching Method: Direct feed through common mode choke (current balun)
Connector: “N”


Mechanical Specifications of 2m 6Element Rear Mount Antenna 2m6WAR

Number of elements: 6
Element Diameter: 8 mm Aluminum tube
Dipole Diameter: 8 mm Hard Copper tube plastic coated
Longest element: 1040 mm
Element Mounting Position: Below the Boom
Balun and Connectors: Included
Boom Length: 2m
Boom Size: 20 x 20 mm
Number of Boom Pieces: 2
Guy rope support: Not necessary. Strong boom (by order guy rope support)
Mounting Mast Diameter: 43 – 70 mm 1-11/16″ – 2-3/4″ OD
Survival Wind Speed: 150 km/h
Transportation Length: 1 m
Antenna Weight: 2.5 kg


2m 6Element Rear Mount Antenna 2m6WARG with guy rope support

2m 6Element Rear Mount Antenna 2m6WARG Guy rope support


Antennas-Amplifiers Product Benefits. A Major advance in antenna design.

  • F/B and G/T superiority. All antennas have been calculated using state-of-the-art full 3D EM modeling software including the influence of the boom, bracket, baluns, and connectors. The performance of antennas designed using these techniques is exceptional, far better than antennas designed using the EZNEC program.
  • No tuning antennas. Before dispatch, we assemble and test each antenna’s characteristics. No need to tune any element to get perfect SWR on the intended frequency range. Everything is pre-tuned.
  • Easy to set up. Everything is labeled, just put number to number. Everything is included in the box: Antenna, balun, bracket, and guy rope support if needed. Yours is to assemble and have fun!
  • Mechanical properties. We believe that our antennas are the world’s strongest antennas and are mechanically constructed much better than any antennas from other manufacturers.
The old name of the antenna was PA144-6-2RA


Check all 2m antennas: 2m antennas
Horizontal or vertical antennas
2m CROSS antennas
2m XPOL antennas
Weight 3,8 kg
Dimensions 109 × 13 × 10 cm


There are no reviews yet.

Be the first to review “2m 6Element Rear Mount Antenna 2m6WAR”