2m 6Element Wideband Antenna 2m6WA

2m 6Element Wideband Antenna 2m6WA

(1 customer review)

115,00 

2m 6Element Wideband Antenna 2m6WA 144-146MHz or 144-148MHz

SKU: 0550 Categories: ,

2m 6Element Wideband Antenna 2m6WA 144-146MHz

Solid lightweight 2m 6Element Wideband Antenna 2m6WA for portable or permanent use. Perfect for MS or even EME with 100W

 

2m 6Element Wideband Antenna 2m6WA

 

Could be produced in three versions:

  • 2m6DX – for the DX part of the band 144-145MHz. Excellent for 2m contests as stack antenna
  • 2m6WA – wideband version 144-146MHz
  • 2m6Wide – extra wideband version with 4MHz bandwidth 144-148MHz Region 2

 

What does 2m6WA mean?

  • 2m – 2m band
  • 6 – 6 elements
  • W – Wideband version covers 144-146 MHz
  • A – Boom parts less than 1.2m

 

Electrical Specifications of 2m 6Element Wideband Antenna 2m6WA

Frequency Range: 144 – 146 MHz
Free Space Forward Gain: 11.3 dBi
Front-to-Back Ratio: 25 dB
-3 dB Horizontal Beamwidth: 47°
Polarization: Horizontal or Vertical
Nominal Input Impedance: 50 Ohms
SWR Across Entire Band: < 1.2
Maximum Power Input: 500W (By order “P” Power version 1500W)
Matching Method: Direct feed through common mode choke (current balun)
Connector: “N”

 

Mechanical Specifications of 2m 6Element Wideband Antenna 2m6WA

Number of elements: 6
Element Diameter: 8 mm Aluminum tube
Dipole Diameter: 8 mm Hard Copper tube plastic coated
Longest element: 1040 mm
Element Mounting Position: Below the Boom
Balun and Connectors: Included
Boom Length: 2 m
Boom Size: 20 x 20 mm
Number of Boom Pieces: 2
Guy rope support: Not necessary. Strong boom
Mounting Mast Diameter: 43 – 70 mm 1-11/16″ – 2-3/4″ OD
Survival Wind Speed: 150 km/h
Transportation Length: 1.1 m
Antenna Weight: 1.8 kg

 

2m 6Element Wideband Antenna 2m6WA Measured SWR

 

How to use this excellent 2m6WA antenna for 2m 144 MHz EME work?

What Others are Saying:

I have started EME on 2 meters using 4 x 6-element yagi (PA144-6-2A) and a 4-way power splitter from your company. The antennas were easy to assemble, and I am pleased with the performance of the array! I like your quality products and would buy from your company again.

 

6 element 2-meter Yagi-EME-array-PA144-6-2-at-OZ1BXM

 

The frame is made from 1½” steel tubes. Vertical spacing is 2.20 m, and horizontal spacing is 2.40 m. The azimuth rotator is YAESU G-600 and the vertical is Kenpro KR-550. The upper grey box is a 144 MHz preamplifier, and the other box houses a coax relay. The coax cable is Ecoflex 15, and it feeds 800 W to the EME array.
OZ1BXM Lars

 

 

Antennas-Amplifiers Product Benefits. A Major advance in antenna design.

  • F/B and G/T superiority. All antennas have been calculated using state-of-the-art full 3D EM modeling software including the influence of the boom, bracket, baluns, and connectors. The performance of antennas designed using these techniques is exceptional, far better than antennas designed using the EZNEC program.
  • No tuning antennas. Before dispatch, we assemble and test each antenna’s characteristics. No need to tune any element to get perfect SWR on the intended frequency range. Everything is pre-tuned.
  • Easy to set up. Everything is labeled, just put number to number. Everything is included in the box: Antenna, balun, bracket, and guy rope support if needed. Yours is to assemble and have fun!
  • Mechanical properties. We believe that our antennas are the world’s strongest antennas and are mechanically constructed much better than any antennas from other manufacturers.
The old name of the antenna was PA144-6-2A

 

Check all 2m antennas: 2m antennas
Horizontal or vertical antennas
2m CROSS antennas
2m XPOL antennas

 

Weight 2,7 kg
Dimensions 109 × 13 × 10 cm

1 review for 2m 6Element Wideband Antenna 2m6WA

  1. Steve

    Just a courtesy email to thank you for the fast delivery of my order.
    I am very pleased with the build’s standard quality, no misaligned holes everything fits together perfectly & you and all at AA are to be congratulated.
    Steve G3YTI

Add a review