2m 70cm DualBand Filter 200W Low Loss

Low insertion loss and high power 2m 70cm DualBand Filter 200W transmit/receive. The filter will prevent receiver overload from any HF 6m and 4m station and will suppress all harmonic over 450MHz. Including 720MHz, 864MHz, GSM 930MHz, or 23cm 1296 MHz.

Especially good to put it in line with DualBand 2m-70cm single connector antennas.

Our 2m/70cm dual-band filter is designed to effectively filter out unwanted signals and interference, ensuring a clean and clear signal for your transmissions. It features a bandpass design, which allows signals within the 2m and 70cm bands to pass through while blocking out signals outside of these frequencies. Its compact size and easy installation make it a convenient and practical addition to your radio setup.

2m 70cm DualBand Transmitting Filter 200W

Electrical Characteristics of 2m 70cm DualBand Filter 200W

Frequency Range: 144-450MHz
Nominal Impedance: 50 Ω
Input Return Loss: Better than -26 dB
Maximum SWR on any frequency: <= 1.11

Insertion Loss of 2m 70cm DualBand Filter 200W

1.8MHz 110dB
3.8MHz 103dB
7.05MHz 102dB
14.02MHz 101dB
21MHz 89dB
28MHz 89dB
50MHz 51dB
54MHz 46dB
70MHz 30dB
87.5MHz 13dB
144MHz 0.07dB, RL –35dB
148MHz 0.07dB, RL –35dB
430MHz 0.12dB, RL –26dB
440MHz 0.11dB, RL –41dB
450MHz 0.14dB, RL –23dB
720MHz 28dB
864MHz 38dB
930MHz 41dB (GSM)
1000MHz 44dB
1296MHz 58dB
1500MHz 64dB

Maximum Power Input: SWR 1:1 200W, 1:1.5 140W, 1:2 110W, 1:3 75W
Connectors: “N”
Weight: 0.2 kg
Mounting and Working Environment: Any position. Indoor