Strong 6m 3el Rear Mount Antenna 6m3DXR

Pretuned strong 6m 3el Rear Mount Antenna 6m3DXR is an excellent choice to put on the balcony in a confined space or to make a stack of four antennas on the side of the tower for a fixed direction. Even with three or four stacks in different directions, you can cover 360° for top scores in the competitions.

Strong and sturdy 6m 3el Rear Mount Antenna 6m3DXR with 30x30mm boom is designed to withstand a gust of winds up to 160 km/h.

The old name of the antenna was PA50-3-1.5RB

 

6m 3el Rear Mount Antenna 6m3DXR Strong Construction

 

What does 6m3DXR mean?

• 6m – 6m portable Yagi antenna
• 3 – 3 elements
• DX – Intended for use in DX part of band 50-50.5MHz with excellent SWR
• R – Rear mount

 

Electrical Specifications of 6m 3el Rear Mount Antenna 6m3DXR

Frequency Range: 50 – 50.5 MHz
Free Space Forward Gain: 6.8 dBi
Front-to-Back Ratio: 17 dB
-3 dB Horizontal Beamwidth: 66.6°
Polarization: Horizontal
Nominal Input Impedance: 50 Ohms
SWR Across Entire Band: <1.2
Maximum Power Input: 1000 W (more by request)
Matching Method: Direct feed through common mode choke (current balun)
Connector: “N” (Silver plated Teflon SO 239 or 7/16 DIN by request)

 

Power input options by order of 6m 3el Rear Mount Antenna 6m3DXR

“P” – Power version “N” Input connector RG142 5mm Teflon balun cable: 1500W 6m3DXRP
“E” – Extra power 7/16 DIN Input connector SF250 7mm Teflon balun cable: 3500W 6m3DXRE
“EX” – EXtreme power 7/16 DIN Input connector RG115 10mm Teflon balun cable: 8000W 6m3DXREX

 

6m 3el Rear Mount Antenna 6m3DXR Azimuth Radiation Pattern

 

Mechanical specifications of 6m 3el Rear Mount Antenna 6m3DXR

Number of Elements: 3
Tapered elements. Center tube 12mm, extensions 10 and 8mm
Tapered dipole. Center tube 12mm, extensions 10 and 8mm
Balun and Connector: Included
Longest Element: 3.1 meter
Element Mounting Position: Below the boom
Boom Length: 1.46 meter
Boom Size: 30 x 30 mm
Turning Radius: 2 meter
Number of Boom Pieces: 1
Guy rope support: Not necessary. Strong boom.
Mounting Mast Diameter: 43 – 70 mm 1-11/16″ – 2-3/4″ OD
Clamp: M8 Stainless Steel
Survival Wind Speed: 160 km/h
Net Weight: 2.3 kg
Gross Weight: 3.5 kg
Transportation Length: 1.49 meter

 

6m3DXR Two antennas vertical stacking distances:

2.85 m Gain 9.8 dBi, F/B 22 dB (+3 dB)
3.15 m Gain 10.1 dBi, F/B 20 dB (+3.3 dB)
3.15 m Gain 10.3 dBi, F/B 15 dB (+3.5 dB)

6m3DXR Four antennas vertical stacking distances:

2.65 m Gain 12.6 dBi, F/B 23 dB (+5.8 dB)
2.85 m Gain 12.8 dBi, F/B 21.5 dB (+6 dB)
3.05 m Gain 13 dBi, F/B 19 dB (+6.2 dB)
3.3 m Gain 13.2 dBi, F/B 17 dB (+6.4 dB)

 

Antennas-Amplifiers Product Benefits. A Major advance in Amateur Radio antenna design.

 

• F/B and G/T superiority.

All antennas have been calculated using state-of-the-art full 3D Electromagnetic Simulation Software including the influence of the boom, bracket, baluns, and connectors. The performance of antennas designed using these techniques is exceptional, far better than antennas designed using “wire” programs.
Comparison of EM simulation software

• No tuning antennas
  

Before dispatch, we assemble each antenna and test antenna characteristics. That means you may expect exceptionally good electrical and mechanical attributes including low SWR across the designed range immediately after assembling.
No need to tune the dipole, or any other element to get perfect SWR on the intended frequency range. Everything is pre-tuned.

• Easy to set up

Everything is labeled, just put number to number. The antenna can be assembled with hand tools in a couple of minutes.
Everything is included in the antenna box: Antenna, balun with connector, and bracket. Yours is to assemble and have fun!

 

Check all 6m antennas here