6m 3elements Antenna 6m3DX

6m 3elements Antenna 6m3DX


6m 3elements Antenna 6m3DX 50-50.5MHz

SKU: 0110 Category:

6m 3elements Antenna 6m3DX for DXing and Portable

Perfect 6m 3elements Antenna 6m3DX to put in a car for portable. Good as a stationary antenna. Relative short boom will produce a wide azimuth radiation pattern. No need to turn the antenna all the time in certain directions.

The old name of the antenna was PA50-3-1.5B


6m 3elements Antenna 6m3DX appearance:

6m 3elements Antenna 6m3DX


What does 6m3DX mean?

6m – Magic band antenna 50MHz
3 – Elements
DX – Intended for use in DX part of band 50-50.5MHz with excellent SWR


Electrical specifications of 6m 3 elements Antenna 6m3DX

Frequency Range: 50 – 50.5 MHz
Free Space Forward Gain: 7 dBi
Front-to-Back Ratio: 21 dB
-3 dB Horizontal Beamwidth: 66.2°
Polarization: Horizontal
Nominal Input Impedance: 50 Ohm
SWR Across Entire Band: < 1.2
Maximum Power Input: 1000 W (more by request)
Matching Method: Direct feed through common mode choke (current balun)
Connector: “N” (Silver plated Teflon SO 239 or 7/16 DIN by request)


Power input options by order of 6m 3 elements Antenna 6m3DX

“P” – Power version “N” Input connector RG142 5mm Teflon balun cable: 1500W 6m3DXP
“E” – Extra power 7/16 DIN Input connector SF250 7mm Teflon balun cable: 3500W 6m3DXE
“EX” – EXtreme power 7/16 DIN Input connector RG115 10mm Teflon balun cable: 8000W 6m3DXEX


Azimuth Radiation Pattern of 6m 3elements Antenna 6m3DX


6m3DX Azimuth Radiation Pattern


Mechanical specifications of 6m 3 elements Antenna 6m3DX

Number of Elements: 3
Tapered elements. Center tube 12mm, extensions 10 and 8mm
Tapered dipole. Center tube 12mm, extensions 10 and 8mm
Balun and Connector: Included
Longest Element: 3.1 meter
Element Mounting Position: Below the boom
Boom Length: 1.46 meter
Boom Size: 20×20 mm
Number of Boom Pieces: 1
Turning Radius: 1.8m
Guy rope support: Not necessary. Strong boom
Mounting Mast Diameter: 43 – 70 mm 1-11/16″ – 2-3/4″ OD
Clamp: M8 Stainless Steel
Survival Wind Speed: 150km/h
Net Weight: 1.7 kg
Gross Weight: 2.9 kg
Transportation Length: 1.49m


6m3DX Two antennas vertical stacking distances:

2.7m. Gain 9.8 dBi, F/B 25dB (+2.8dB)
2.9m. Gain 10 dBi, F/B 24dB (+3dB)
3.25m, Gain 10.3dBi, F/B 20dB (+3.3dB)


6m3DX Four antennas vertical stacking distances:

2.7m. Gain 12.8dBi, F/B 23dB (+5.8dB)
2.9m. Gain 13dBi, F/B 22dB (+6dB)
3.1m, Gain 13.2dBi, F/B 21dB (+6.2dB)
3.25m, Gain 13.3dBi, F/B 19dB (+6.3dB)


Antennas-Amplifiers Product Benefits. A Major advance in Amateur Radio antenna design.


  • F/B and G/T superiority.

All antennas have been calculated using state-of-the-art full 3D Electromagnetic Simulation Software including the influence of the boom, bracket, baluns, and connectors. The performance of antennas designed using these techniques is exceptional, far better than antennas designed using “wire” programs.
Comparison of EM simulation software

  • No tuning antennas

Before dispatch, we assemble each antenna and test antenna characteristics. That means you may expect exceptionally good electrical and mechanical performance including low SWR across the designed range immediately after assembling.
No need to tune the dipole, or any other element to get perfect SWR on the intended frequency range. Everything is pre-tuned.

  • Easy to set up

Everything is labeled, just put number to number. The antenna can be assembled with hand tools.
Everything is included in the antenna box: Antenna, balun with connector, and bracket. Yours is to assemble and have fun!


Click here to look at all 6-meter antennas


Weight 2,9 kg
Dimensions 149 × 11 × 10 cm


There are no reviews yet.

Be the first to review “6m 3elements Antenna 6m3DX”