Magic Band 6m 5elements Antenna 6m5DX

Excellent 6m 5elements Antenna 6m5DX for “Magic” band DXing. Designed for stationary or portable use. The antenna combines a strong tapered boom to reduce the wind area,  improve mechanical stability, and reduce vibrations. A strong “RA” bracket will make sure the antenna will be always in a certain direction. Elements are tapered to reduce vibrations at high winds. The starting element diameter is 12 mm. Tapered elements will reduce the wind load.

Up to 20 minutes is enough for assembling even if you see the antenna for the first time. Everything is labeled, just put number to number. The antenna can be assembled with hand tools, as well as with power tools.

The old name of the antenna was PA50-5-4.3B

 

6m 5elements Antenna 6m5DX DX and portable appearance:

 

What does 6m5DX mean?

6m – Magic band 50MHz antenna
5 – Elements
DX – Intended for use in DX part of band 50-50.5MHz with excellent SWR

 

Electrical specifications of 6m 5 elements Antenna 6m5DX

Frequency Range: 50 – 50.5 MHz
Free Space Forward Gain: 10.3dBi
Front-to-Back Ratio: 27dB
-3 dB Horizontal Beam-width: 53.4°
Polarization: Horizontal
Nominal Input Impedance: 50 Ohm
SWR Across Entire Band: < 1.2
Maximum Power Input: 1000 W (more by request)
Matching Method: Direct feed through common mode choke (current balun)
Connector: “N” (Silver plated Teflon SO 239 or 7/16 DIN by request)

 

Power input options by order of 6m 5 elements Antenna 6m5DX

“P” – Power version “N” Input connector RG142 5mm Teflon balun cable: 1500W 6m5DXP
“E” – Extra power 7/16 DIN Input connector SF250 7mm Teflon balun cable: 3500W 6m5DXE
“EX” – EXtreme power 7/16 DIN Input connector RG115 10mm Teflon balun cable: 8000W 6m5DXEX

 

50MHz Magic band 6m 5elements Antenna 6m5DX Azimuth Radiation Pattern:

 

Mechanical specifications of 6m 5 elements Antenna 6m5DX

Number of Elements: 5
Tapered elements. Center tube 12mm, extensions 10 and 8mm
Tapered dipole. Center tube 12mm, extensions 10 and 8mm
Balun and Connector: Included
Longest Element: 3.1 meter
Element Mounting Position: Below the boom
Boom Length: 4.3 meter
Tapered boom. 40x40mm, 30x30mm
Turning Radius: 2.6 meter
Number of Boom Pieces: 3
Guy rope support: Not necessary. Strong boom.
Mounting Mast Diameter: 43 – 70 mm 1-11/16″ – 2-3/4″ OD
Clamp: 2x M8 Stainless Steel
Survival Wind Speed: 160 km/h
Net Weight: 5.6 kg
Gross Weight: 7.2 kg
Transportation Length: 1.49 m

 

Stacking Distances for two 6m5DX antennas:

Vertical: 5.5m for 13.1dBi (+2.8 dB)
Horizontal: 6.1m for 13.1dBi (+2.8 dB)

 

Balun, dipole, and connector view of 6m5DXP

A separate version with boom or elements parts up to 118cm 6m5DXA (Airplane checked baggage length)

 

 

Antennas-Amplifiers Product Benefits. A Major advance in Amateur Radio antenna design.

 

• F/B and G/T superiority.

All antennas have been calculated using state-of-the-art full 3D Electromagnetic Simulation Software including the influence of the boom, bracket, baluns, and connectors. The performance of antennas designed using these techniques is exceptional, far better than antennas designed using “wire” programs.
Comparison of EM simulation software

• No tuning antennas
  

Before dispatch, we assemble each antenna and test antenna characteristics. That means you may expect exceptionally good electrical and mechanical performance including low SWR across the designed range immediately after assembling.
No need to tune the dipole, or any other element to get perfect SWR on the intended frequency range. Everything is pre-tuned.

• Easy to set up

Everything is labeled, just put number to number. The antenna can be assembled with hand tools.
Everything is included in the antenna box: Antenna, balun with connector, and bracket. Yours is to assemble and have fun!

 

All 6m antennas