6m 6elements DX Yagi 6m6DXD

6m 6elements DX Yagi 6m6DXD

(1 customer review)

294,00 

6m 6elements DX Yagi Antenna 6m6DXD for contests or DXing

SKU: 0142 Category:

Higher Gain 6m 6elements DX Yagi 6m6DXD

Low Noise higher gain 6m 6elements DX Yagi 6m6DXD will make sure you can hear very weak signals and give you the extra edge you need in contests or enjoy DXing. New Es season has arrived. This 6 Elements 50 MHz Yagi antenna provides stunning performance across the 50 – 50.5 MHz DX band.

The old name of the antenna was PA50-6-6DG

 

6m 6elements DX Yagi 6m6DXD apperance:

6m 6elements DX Yagi Antenna 6m6DXD

 

What does 6m6DXD mean?

  • 6m – 6m magic band antenna
  • 6 6 elements
  • DX – Intended for use in DX part of band 50-50.5MHz with excellent SWR
  • D – Boom parts length up to 1.98m (DHL or TNT Economy Transport)

 

Electrical specifications of 6m 6elements DX Yagi 6m6DXD

Frequency Range: 50 – 50.5 MHz
Free Space Forward Gain: 11.65 dBi
Front-to-Back Ratio: 32 dB
-3 dB Horizontal Beamwidth: 47°
Polarization: Horizontal
Nominal Input Impedance: 50 Ohm
SWR Across Entire Band: < 1.2
Maximum Power Input: 1000 W (or more by order)
Matching Method: Direct feed through Teflon RG142 common mode choke (current balun)
Connector: “N” (Silver plated Teflon SO 239 or 7/16 DIN by request)

 

Power input options by order of 6m 6elements DX Yagi 6m6DXD

“P” – Power version “N” Input connector RG142 5mm Teflon balun cable: 1500W 6m6DXDP
“E” – Extra power 7/16 DIN Input connector SF250 7mm Teflon balun cable: 3500W 6m6DXDE
“EX” – EXtreme power 7/16 DIN Input connector RG115 10mm Teflon balun cable: 8000W 6m6DXDEX

 

Mechanical specifications of 6m 6elements DX Yagi 6m6DXD

Number of Elements: 6
Tapered elements. Center tube 12mm, extensions 10 and 8mm
Tapered dipole. Center tube 12mm, extensions 10 and 8mm
Balun and Connector: Included
Longest Element: 3.1 meter
Element Mounting Position: Below the boom
Boom Length: 6.17 meter
Tapered boom: 40 x 40 mm, 30 x 30 mm, 20 x 20 mm
Turning Radius: 3.5 meter
Number of Boom Pieces: 4
Guy rope support: Yes, Included
Mounting Mast Diameter: 43 – 70 mm 1-11/16″ – 2-3/4″ OD
Clamp: 2x M8 Stainless Steel
Survival Wind Speed: 150 km/h
Net Weight: 8.3 kg
Gross Weight: 9.7 kg
Transportation Length: 2 meter

 

6m 6elements DX Yagi 6m6DXD Azimuth Radiation Pattern

 

6m 6elements DX Yagi Antenna 6m6DXD Azimuth Radiation Pattern

 

 

Horizontal Stacking distance for 6m 6elements DX Yagi 6m6DXD

6.9m Gain 14.5 dBi (+2.85dB)

 

Vertical Stacking distance for 6m 6elements DX Yagi 6m6DXD

6.1m Gain 14.55 dBi (+2.9dB)

 

6m 6elements DX Yagi 6m6DXD appearance

6m 6elements DX Yagi Antenna 6m6DXD

 

Antennas-Amplifiers Product Benefits. A Major advance in Amateur Radio antenna design.

 

  • F/B and G/T superiority.

All antennas have been calculated using state-of-the-art full 3D Electromagnetic Simulation Software including the influence of the boom, bracket, baluns, and connectors. The performance of antennas designed using these techniques is exceptional, far better than antennas designed using “wire” programs.
Comparison of EM simulation software

  • No tuning antennas

Before dispatch, we assemble each antenna and test antenna characteristics. That means you may expect excellent electrical and mechanical attributes including low SWR across the designed range immediately after assembling.
No need to tune the dipole, or any other element to get perfect SWR on the intended frequency range. Everything is pre-tuned.

  • Easy to set up

Everything is labeled, just put number to number. The antenna can be assembled with hand tools in a couple of minutes.
Everything is included in the antenna box: Antenna, balun with connector, and bracket. Yours is to assemble and have fun!

 

What others say about 6m6DXD (PA50-6-6DG)

Erwin DK5EW
“The antenna was very well packed in a very hard cover so there was no damage due to transport.
Today I installed the antenna. The installation was very easy as you marked all parts perfectly in a way that a mistake is impossible.

The quality of the antenna material is great also the mechanical workmanship is fine. It took me about 1 hour to mount the antenna and another hour to install it on the tower.
The SWR is – as you promised – very low in the ordered frequency range.
Please find attached a picture of the antenna and an SWR plot I made with my VNA

PA50-6-6-DK5EW-Make-More-Miles-On-VHF

 

PA50-6-6-DK5EW-SWR-Measuring-Make-More-Miles-On-VHF

73’s Erwin/DK5EW http://www.mmmonvhf.de/

 

Check all 6m antennas here

 

Weight 9,5 kg
Dimensions 199 × 14 × 14 cm

1 review for 6m 6elements DX Yagi 6m6DXD

  1. Erwin

    “The antenna was very well packed in a very hard cover so there was no damage due to transport.
    Today I installed the antenna. The installation was very easy as you marked all parts perfectly in a way that a mistake is impossible.

    The quality of the antenna material is great also the mechanical workmanship is fine. It took me about 1 hour to mount the antenna and another hour to install it on the tower.
    The SWR is – as you promised – very low in the ordered frequency range.

    Erwin DK5EW

Add a review