Low Noise 6m 7elements DX Contest Antenna 6m7DXP

Excellent 6m 7elements DX Contest Antenna 6m7DXP will make sure you can hear very weak signals and give you the extra edge you need in contests or just enjoy the Ham Radio Hobby. Digging weak signals with this almost 9m boom super Yagi antenna is easy. Guy rope support is specially made for high winds, heavy rains, and strong Sun. Designed tapered boom and elements will reduce wind load, as well as vibrations in the wind.

The old name of the antenna was PA50-7-9BGP

 

6m 7 elements DX Contest Yagi Antenna 6m7DXP

 

What does 6m7DXP mean?

• 6m – 6m Magic band antenna
• 7 – 7 elements
• DX – Covers DX part of 6m band 50-50.5MHz with low SWR
• P – Power version 1500W

 

Electrical specifications of 6m 7 elements DX Contest Antenna 6m7DXP

Frequency Range: 50 – 50.5MHz
Free Space Forward Gain: 12.75dBi
Front-to-Back Ratio: 32dB
-3 dB Horizontal Beamwidth: 43.2°
Polarization: Horizontal
Nominal Input Impedance: 50 Ohm
SWR Across Entire Band: < 1.2
Maximum Power Input: 1500W (more by order)
Matching Method: Direct feed through Teflon RG142 common mode choke (current balun)
Connector: “N” (Silver plated Teflon SO 239 or 7/16 DIN by request)

 

Power input options by order of DX Contest Antenna 6m7DXP

“E” – Extra power 7/16 DIN Input connector SF250 7mm Teflon balun cable: 3500W 6m7DXE
“EX” – EXtreme power 7/16 DIN Input connector RG115 10mm Teflon balun cable: 8000W 6m7DXEX

 

6m 7elements DX Contest Antenna 6m7DXP Azimuth Radiation Pattern

 

DX Contest Antenna 6m7DXE 3500W version

 

6m 7elements DX Contest Antenna 6m7DXEX 8000W version

 

Mechanical specifications of 6m 7 elements DX Contest Antenna 6m7DXP

Number of Elements: 7
Tapered elements. Center tube 12mm, extensions 10 and 8mm
Tapered dipole. Center tube 12mm, extensions 10 and 8mm
Balun and Connector: Included
Longest Element: 3.1 meter
Element Mounting Position: Below the boom
Boom Length: 8.68 meter
Tapered Boom: 40x40mm, 30x30mm, 20x20mm
Number of Boom Pieces: 7
Turning Radius: 5 meter
Guy rope support: Yes, included
Mounting Mast Diameter: 43 – 70 mm 1-11/16″ – 2-3/4″ OD
Clamp: 2 x M8 Stainless Steel
Survival Wind Speed: 150km/h
Net Weight: 12.5 kg
Gross Weight: 14 kg
Transportation Length: 1.49 meter

 

Stacking Distance for two 6m 7elements DX Contest Antenna 6m7DXP

Horizontal 8m for Gain: 15.55 dBi (+2.85 dB)
Vertical 7.2m for Gain: 15.55 dBi (+2.85 dB)

 

6m 7elements DX Contest Antenna 6m7DXP 50-50.5MHz

 

Antennas-Amplifiers Product Benefits. A Major advance in Amateur Radio antenna design.

 

• F/B and G/T superiority.

All antennas have been calculated using state-of-the-art full 3D Electromagnetic Simulation Software including the influence of the boom, bracket, baluns, and connectors. The performance of antennas designed using these techniques is exceptional, far better than antennas designed using “wire” programs.
Comparison of EM simulation software

• No tuning antennas
  

Before dispatch, we assemble each antenna and test antenna characteristics. That means you may expect exceptionally good electrical and mechanical performance including low SWR across the designed range immediately after assembling.
No need to tune the dipole, or any other element to get perfect SWR on the intended frequency range. Everything is pre-tuned.

• Easy to set up

Everything is labeled, just put number to number. The antenna can be assembled with hand tools.
Everything is included in the antenna box: Antenna, balun with connector, and bracket. Yours is to assemble and have fun!

 

Bruce N9BX achieved excellent results with this 6m DX and EME antenna 6m7DXP

 

The New 6m7DXP 7 Element 6 Meter Yagi is in the Air. The first day and LU, CE, and HC on FT8, must have been a TEP opening. But the antenna has a 1.0 to 1 SWR and Sits at 42 Feet. One man assembled and one man put it up on the tower.
Excellent antenna.

Bruce N9BX

 

All 6m antennas