Super Gain 6m 9elements Extreme Strong Antenna 6m9DXEXSHD
Ultimate 6m 9elements Extreme Strong Antenna 6m9DXEXSHD devoted for any harsh environment. Norway winter, the North Pole, or Hurricane Katrina cannot harm this antenna. An almost 12m boom will ensure the best gain, extremely low sidelobes, and the ability to easily hear weak signals.
This antenna is constructed with the same boom and element sizes as our heavy-duty HF antennas.
Everything is labeled on the antenna, just put number to number. No need to tune any length or position of elements. All is already pre-tuned for the perfect radiation pattern and SWR. Maximum power input is 8000W for the price. Look down for a reduced version of 3500W or 1500W.
The old name of the antenna was PA50-9-12BGEXSHD.
6m 9elements Extreme Strong Antenna 6m9DXEXSHD appaerance
What does 6m9DXEXSHD mean?
- 6m – 6m magic band antenna
- 9 – 9 elements
- DX – Intended for use in DX part of band 50-50.5MHz with excellent SWR
- EX –extreme power. The default maximum power is 8000W
- SHD – Super Heavy Duty Construction
6m 9elements Extreme Strong Antenna 6m9DXEXSHD construction
Electrical specifications of 6m 9 elements Extreme Strong Antenna 6m9DXEXSHD
Frequency Range: 50 – 50.5 MHz
Free Space Forward Gain: 13.7 dBi
Front-to-Back Ratio: 33 dB
Nominal Input Impedance: 50 Ohm
SWR Across Entire Band: < 1.2
Maximum Power Input: 8000 W (or less by request)
Matching Method: Direct feed through RG115 10mm Teflon common mode choke (current balun)
Connector: 7/16 DIN (“N” or Silver plated Teflon SO 239 by request)
50MHz 9elements Antenna 6m9DXEXSHD designed for element windspeed of 350km/h
Power input options by order of 6m9DXEXSHD
“P” – Power version “N” Input connector RG142 5mm Teflon balun cable: 1500W 6m9DXPSHD
“E” – Extra power 7/16 DIN Input connector SF250 7mm Teflon balun cable: 3500W 6m9DXESHD
6m9DXEXSHD super strong 60x60mm boom. Elements starting diameter 25mm
Mechanical specifications of 6m 9 elements Extreme Strong Antenna 6m9DXEXSHD
Number of Elements: 9
Tapered elements. Center tube 25mm, extensions up to 15mm
Tapered dipole. Center tube 25mm, extensions up to 15mm
Balun and Connector: Included
Longest Element: 3.1 meter
Element Mounting Position: Below the boom
Boom Length: 11.7 meter
Boom size: 60x60mm different wall thickness
Turning Radius: 7 meter
Number of Boom Pieces: 8
Guy rope support: Yes, 4 x AISI 316L (A4) Stainless Steel 4mm rope support
Mounting Mast Diameter: 43 – 70 mm 1-11/16″ – 2-3/4″ OD
Clamp: 3x M12 AISI 316L (A4) Stainless Steel
Element Survival Wind Speed: 350 km/h
Net Weight: 54 kg
Gross Weight: 63 kg
Transportation Length: 1.49 m
Antennas-Amplifiers Product Benefits. A Major advance in Amateur Radio antenna design.
- F/B and G/T superiority.
All antennas have been calculated using state-of-the-art full 3D Electromagnetic Simulation Software including the influence of the boom, bracket, baluns, and connectors. The performance of antennas designed using these techniques is exceptional, far better than antennas designed using “wire” programs.
Comparison of EM simulation software
- No tuning antennas
Before dispatch, we assemble each antenna and test antenna characteristics. That means you may expect exceptionally good electrical and mechanical attributes including low SWR across the designed range immediately after assembling.
No need to tune the dipole, or any other element to get perfect SWR on the intended frequency range. Everything is pre-tuned.
- Easy to set up
Everything is labeled, just put number to number. The antenna can be assembled with hand tools.
Everything is included in the antenna box: Antenna, balun with connector, and bracket. Yours is to assemble and have fun!
DK8NE tested the antenna hanging from a cherry-picker.
Return Loss (SWR) test
What a beast and how the antenna is on point, even hanging from a cherry-picker. Great work.
Mny tnx again!
Antenna will go to my QTH on the mountain in about 2 or 3 weeks. I am looking forward to testing it from there!
73s, Uli DK8NE
Check all 6m antennas