6m Rear Mount XPOL Yagi Antenna 6m6XPOLR 50-50.5MHz

The Longest Boom 6m Rear Mount XPOL Yagi Antenna 6m6XPOLR 3+3 elements. It’s excellent to put on any metal mast. Does not need fiberglass support. If you want to experiment with polarizations or try MS this antenna is for you.

 

6m Rear Mount XPOL Yagi Antenna 6m6XPOLR XPOL bracket view

 

What does 6m6XPOLR mean?

6m – Magic band antenna
6 – Elements (3+3)
XPOL – Antenna has 2 sets of elements oriented in an “X” format. One set of elements is +45 degrees to the Earth, the other -45 degrees.
R – Rear mount

 

Electrical Specifications for 6m Rear Mount XPOL Yagi Antenna 6m6XPOLR

Frequency Range: 50-50.5 MHz
Free Space Forward Gain: 6.8 dBi
Front-to-Back Ratio: 20 dB
-3 dB Azimuth Beamwidth: 66.85°

 

-3 dB Vertical Beamwidth: 125.1°

 

 

Polarization: Horizontal, Vertical, RHCP, LHCP with phase shift
Distance Between Dipoles: 40 mm
Nominal Input Impedance: 50 Ohms
SWR Across Entire Band: < 1.2
Maximum Power Input: 2000 W per antenna. Or more by request
Matching Method: Direct feed through common mode choke (current balun)
Connectors: 2 x “N”

 

Mechanical Specifications for 6m Rear Mount XPOL Yagi Antenna 6m6XPOLR

Number of Elements:  6 (3 + 3)
Elements Diameter: 12 mm, extensions 10 mm and 8 mm
Dipole Diameter: 12 mm, extensions 10 mm and 8 mm
Longest Element: 3.1 meter
Element Mounting Position: Above the Boom. Slant configuration +-45°
Balun and Connectors: Included
Boom Length: 2m
Boom Size: 30 x 30 mm
Turning Radius: 4.5 meter
Number of Boom Pieces: 2
Guy rope support: Yes, Included
Mounting Mast Diameter: 43 – 70 mm 1-11/16″ – 2-3/4″ OD
Clamp: 2 x M8 Stainless Steel
Survival Wind Speed: 150 km/h
Net Weight: 5.6 kg
Transportation Length: 1.2 meter

 

6m Rear Mount XPOL Yagi Antenna 6m6XPOLR 1000W Balun and Connector View

 

6m XPOL Yagi Antenna 3+3 elements 6m6XPOLR

Antennas-Amplifiers Product Benefits. A Major advance in Amateur Radio antenna design.

 

• F/B and G/T superiority.

All antennas have been calculated using state-of-the-art full 3D Electromagnetic Simulation Software including the influence of the boom, bracket, baluns, and connectors. The performance of antennas designed using these techniques is exceptional, far better than antennas designed using “wire” programs.
Comparison of EM simulation software

• No tuning antennas
  

Before dispatch, we assemble each antenna and test antenna characteristics. That means you may expect exceptionally good electrical and mechanical attributes including low SWR across the designed range immediately after assembling.
No need to tune the dipole, or any other element to get perfect SWR on the intended frequency range. Everything is pre-tuned.

• Easy to set up

Everything is labeled, just put number to number. The antenna can be assembled with hand tools.
Everything is included in the antenna box: Antenna, balun with connector, and bracket. Yours is to assemble and have fun!

 

Check all 6m antennas