70cm 430-450MHz BandPass Filter 2500W Extreme Power
Extreme Power 70cm 430-450MHz BandPass Filter 2500W. This filter could withstand any “Big Gun” power up to 2500W. And any commercial 70cm linear amplifier. Super low insertion loss is just 0.06dB. Put this filter after any linear amplifier up to 2.5kW and the filter will suppress all lower frequencies from 23 to 100dB and all harmonics by 26 to 60 dB. With its super low insertion loss, the filter can be used as a receiving filter before any low noise preamplifier with ATF, PGA, SAV, or SKY chips.
The filter is identical to the 1000W version except for connectors 7/16 DIN – “N”.
70cm 430-450MHz BandPass Filter 2500W Extreme Power Appearance:
Measured results of 70cm Extreme Power 430-450MHz BandPass 2500W
1.8 MHz: < -110 dB
3.8 MHz: < -110 dB
7.1 MHz: < -108 dB
14.15 MHz: < -100 dB
21.4 MHz: -92 dB
28.4 MHz: -84 dB
50.1 MHz: -69 dB
70.2 MHz: -60 dB
88 MHz: -54 dB
144 MHz: -39 dB
146 MHz: -39 dB
148 MHz: -38 dB
220 MHz: -24 dB
225 MHz: -23 dB
430 MHz: -0.06 dB, Input RL batter than -34 dB
432.1 MHz: -0.06 dB, Input RL batter than -34 dB
440 MHz: -0.06 dB, Input RL batter than -34 dB
860 MHz: -26 dB
864.2 MHz: -26 dB
880 MHz: -27 dB
1240 Mhz: -64 dB
1296.1 MHz: -48 dB
Maximum Power Input at SWR:
1:1 2500W, 1:1.1.5 1600W, 1:2 1350W, 1:3 1150W
70cm 430-450MHz BandPass Filter 2500W Insertion Loss 2m, 70cm and 23cm
70cm 430-450MHz BandPass Filter 2500W Extreme Power HF Suppression:
70cm BandPass Filter 2500W 10m, 6m, 4m, and FM Suppression:
430-450MHz BandPass Filter 2500W 2m and 1.25m Suppression:
70cm 430-450MHz BandPass Filter 2500W zoomed:
70cm 430-450MHz BandPass Filter Extreme Power Harmonics Suppression:
Reviews
There are no reviews yet.