Cross Satellite Repeater DualBand Antenna 2m70cm9CROSS two Connectors

Cross Satellite Repeater DualBand Antenna 2m70cm9CROSS with two separate connectors. 70cm Horizontal polarization. 2m Vertical polarization. Satellite – Repeater dual-band Yagi.

 

Cross Satellite Repeater DualBand Antenna 2m70cm9CROSS Wideband Two Connectors

Cable lead on 2m70cm9CROSS Cross Yagi antenna.

 

What does 2m70cm9CROSS mean?

• 2m – Covers 144-146MHz frequency range
• 70cm – Covers 430-440MHz frequency range
• 9 – 9 elements. 3el on a 2m with vertical polarization and 6 on a 70cm with horizontal polarization.
• CROSS – CROSS antenna with horizontal and vertical elements

 

2m Electrical Specifications of Cross Satellite Repeater DualBand Antenna 2m70cm9CROSS

Frequency Range: 144 – 146 MHz
Free Space Forward Gain: 7.15 dBi
Front-to-Back Ratio: 23 dB
Polarization: Vertical
Nominal Input Impedance: 50 Ohms
SWR Across Entire Band: < 1.2
Maximum Power Input: 500W (1500W by order)
Matching Method: Direct feed through common mode choke (current balun)
Connector: “N”

 

70cm Electrical Specifications of Cross Satellite Repeater DualBand Antenna 2m70cm9CROSS

Frequency Range: 430 – 440 MHz
Free Space Forward Gain: 11.4 dBi
Front-to-Back Ratio: 23 dB
Polarization: Horizontal
Nominal Input Impedance: 50 Ohms
SWR Across Entire Band: < 1.2
Maximum Power Input: 850 W
Matching Method: Direct feedthrough RG142 Teflon common mode choke (current balun)

 

Mechanical Specifications of Cross Satellite Repeater DualBand Antenna 2m70cm9CROSS

2m Number of Elements: 3
70cm Number of Elements: 6
2m Elements Diameter: 8 mm Aluminum tube
70cm Elements Diameter: 4 mm rod
Dipole Diameter: 8 mm Hard Copper tube plastic coated
Element Mounting Position: 2m on one side, 70cm on the other side of the boom.
Balun and Connectors: Included
Boom Length: 1m
Boom Size: 20x20mm
Number of Boom Pieces: 1
Guy rope support: Not necessary. Strong boom
Mounting Mast Diameter: 43 – 70 mm 1-11/16″ – 2-3/4″ OD
Clamp: Goiath, M8 screws Stainless Steel
Survival Wind Speed: 150km/h
Net Weight: 1.5kg
Gross Weight: 2.5kg
Transportation Length: 1m

 

Antennas-Amplifiers Product Benefits. A Major advance in antenna design.

• F/B and G/T superiority. All antennas have been calculated using state-of-the-art full 3D EM modeling software including the influence of the boom, bracket, baluns, and connectors. The performance of antennas designed using these techniques is exceptional, far better than antennas designed using the EZNEC program.
• No tuning antennas. Before dispatch, we assemble and test each antenna’s characteristics. No need to tune any element to get perfect SWR on the intended frequency range. Everything is pre-tuned.
• Easy to set up. Everything is labeled, just put number to number. Everything is included in the box: Antenna, balun, bracket, and guy rope support if needed. Yours is to assemble and have fun!
• Mechanical properties. We believe that our antennas are the world’s strongest antennas and are mechanically constructed much better than any antennas from other manufacturers.

The old name of the antenna was PA144-432-CROSS-9-1-2CRA

 

All 2 meter / 70 cm antennas: 2m/70cm antennas
2m / 70cm Common Connector antenna
2m / 70cm Two Connector Dual Band