LowBand DX HF VHF High IP3 Preamplifier 1-200MHz Unconditionally Stable

Unconditionally Stable Universal LowBand DX HF VHF High IP3 Preamplifier 1-200MHz for any HF or VHF frequency up to 200MHz. Not just for Beverage boxes but for 6m (50- 54MHz), 4m (65- 72MHz)  FM (88- 108MHz), 2m (144- 148MHz) or SAR – AIS frequencies 156 – 162MHz. Very low noise and extremely high IP3 you can expect from this preamplifier.

 

LowBand DX HF VHF High IP3 Preamplifier 1-200MHz Unconditionally Stable

 

LowBand DX HF VHF High IP3 Preamplifier 1-200MHz specifications:

1.8 – 30 MHz = 23 dB Flat, NF=1.33 dB, P1dBin=-0.8 dBm
50 MHz = 22.3 dB
144 MHz 19.4 dB
200 MHz 17 dB
Power consumption +12 V / 60 mA.
Connectors: “N”
By order an outdoor case with a bracket (Set +10 EUR)

 

Where to use LowBand HF VHF High IP3 Preamplifier 1-200MHz

• Low Band preamplifier for Beverage antennas
• Low Band preamplifier for K9AY Loop, Waller Flag, Pennant Loop, etc.
• 10m 28 MHz preamplifier for a bad propagation situation
• 6m preamplifier 50 – 54 MHz
• 4m preamplifier 65 – 72 MHz
• FM 88 – 108 MHz preamplifier
• Airband preamplifier 108 and 137 MHz
• 2m 144 – 148 MHz low noise preamplifier
• SRD or AIS preamplifier 156 – 162 MHz
• SDR preamplifier 1 – 200 MHz
• Line amplifier wideband
• Power amplifier up to 150 mW Output

 

LowBand DX HF VHF High IP3 Preamplifier 1-200MHz Measured results with HP8753ES network analyzer

 

LowBand DX HF VHF High IP3 Preamplifier 1-200MHz HF Gain

 

LowBand DX HF VHF Preamplifier 1-200MHz 6m 4m FM Gain

 

LowBand DX HF VHF Preamplifier 1-200MHz 2m SAR AIS Gain

 

Link to all low-noise preamplifiers