6m 200W Narrow BandPass Filter with 4m Notch 50-51MHz
This 6m 200W Narrow BandPass Filter with 4m Notch will pass all frequencies between 50 and 51MHz and highly suppress all others, especially close frequencies in the 4m range, 70- 70.5 MHz.
If your tower has both 6m and 4m antennas, and the 4m transmitter interferes with your 6m reception due to its strong nearby signal, this filter is the solution you need.
High power, low insertion loss of just 0.26 dB, low SWR, and high suppression of all out-of-band signals are the main features of this filter.
No HF, 4m, FM, 2m, or 70cm radio stations will pass through this filter.
Although this is primarily a transmit filter, it can also be used as a receive filter in front of a wideband preamplifier. This filter helps prevent signals outside the 6m band from interfering with your reception, particularly from strong out-of-band signals.
6m 200W Narrow BandPass Filter with 4m Notch 50-51MHz Appearance:

Measured attenuation of 6m 200W Narrow BPF with 4m Notch:
1.8 MHz 108 dB
3.5 MHz 105 dB
7.1 MHz 94 dB
14 MHz 75 dB
21 MHz 61 dB
28 MHz 49 dB
50-51 MHz 0.26dB, Input Return Loss -33 dB, Insertion Loss 0.26dB
Notch 70 – 70.5MHz >70 dB
88 MHz 61 dB
98 MHz 66 dB
108 MHz 71 dB
144 MHz 88 dB
148 MHz 89 dB
222 MHz 96 dB
432 MHz 85dB
450MHz 84 dB
Maximum power input at SWR:
1:1 = 200W; 1:1.5 = 150W; 1:2 = 115W; 1:3 = 90W
Measured characteristics of the 6m 200W Narrow BandPass Filter with 4m Notch:
6m 200W Narrow BandPass Filter with 4m Notch HF 160m to 15m Suppression

6m 200W Narrow BandPass Filter with 4m Notch, 10m Suppression, and 6m Insertion loss and return loss:

6m 200W Narrow Band Pass Filter with 4m Notch, 4m Notch Suppression 70-70.5 MHz

6m 200W Narrow BandPass with 4m Notch 4m Suppression FM 88 – 108 MHz Suppression

6m 200W Narrow BPF with 4m Notch Harmonics Suppression

6m 200W Narrow BandPass Filter with 4m Notch Insertion Loss and Return Loss

6m 200W Narrow BandPass Filter with 4m Notch SWR

All band-pass filters are here

Reviews
There are no reviews yet.