ADS-B 1090MHz Preamplifier Outdoor Low Noise

ADS-B stands for “Automatic Dependent Surveillance-Broadcast”. ADS-B allows pilots and air traffic controllers to “see” and control aircraft more precisely over a far larger percentage of the earth’s surface. With this ADS-B 1090MHz Preamplifier Outdoor with Bias Tee, you will get the possibility of much better reception of ADS-B signals. You will “see” much further airplane traffic than ever before.

 

ADS-B 1090MHz Preamplifier Low Noise Outdoor Mounting Integrated Bias Tee

 

Electrical Characteristics of ADS-B 1090MHz Preamplifier Outdoor

Receive gain:
1.8 MHz -67dB
14 MHz -75 dB
28 MHz -58 dB – HF
50 MHz -57 dB – 6m band
145 MHz -55 dB – 2m band
222 MHz -47 dB – 1.25m band
432 MHz -30 dB – 70cm band
600 MHz -19 dB TV DVB-T or DVB-T2
720 MHz -10 dB – 4G frequencies
1090MHz +13.8dB, NF=0.67dB, RLin -15dB, IP3out >42dBm
1535 MHz -11 dB Radio Link frequencies
1710 MHz -22 dB PCS and LTE
2170 MHz -34 dB
2100 MHz -35 dB
2450 MHz -30dB WiFi band
Consumption: +12 V, 120 mA
Integrated Bias tee. Powering through the coaxial cable

 

Measure results of ADS-B 1090MHz Preamplifier Outdoor

 

ADS-B 1090MHz Preamplifier HF 2m Attenuation

 

ADS-B 1090MHz Preamplifier 222MHz 70cm DVB-T Attenuation

 

ADS-B 1090MHz Preamplifier Gain and Return Loss

 

ADS-B 1090MHz Preamplifier PCS and LTE WiFi Attenuation

 

To get the best results with the preamplifier, place it as close to the antenna as possible. Say 1m of coaxial cable will be good enough.

 

Pair this ADS-B 1090MHz Preamplifier Outdoor with excellent ADS-B antennas here.

Not all versions are listed. From Omni 2.15 dBi and stack 5.5 and 8.8 dBi Omni to super wide angle 2 elements to super gain 15 elements.