Satellite Repeater CROSS Antenna 2m70cm17CROSS Two Connectors

Satellite Repeater CROSS Antenna 2m70cm17CROSS Two Connectors DualBand. Wideband design 144-146MHz and 430-440MHz. Excellent for satellite communications, FM simplex, or repeaters on both bands. Two connectors allow direct connection with two coaxial cables to transceivers with two separate outputs. One for 2m and the second for 70cm. 70 cm Horizontal polarization. 2 m Vertical polarization.

 

Satellite Repeater CROSS Antenna 2m70cm17CROSS DualBand Appearance:

Correct cable routing on 2m70cm17CROSS

 

What does 2m70cm17CROSS mean?

• 2m – 2m band
• 70cm – 70cm band
• 17 – 17 elements. 6el for 2m and 11el for 70cm
• CROSS – CROSS antenna with 70cm horizontal and 2m vertical elements

 

2m Electrical Specifications of Satellite Repeater CROSS Antenna 2m70cm17CROSS

Frequency Range: 144 – 146 MHz
Free Space Forward Gain: 11.2 dBi
Front-to-Back Ratio: 24 dB
Polarization: Vertical
Nominal Input Impedance: 50 Ohms
SWR Across Entire Band: < 1.2
Maximum Power Input: 500 W
Matching Method: Direct feed through common mode choke (current balun)
Connector: “N”

70cm Electrical Specifications of Satellite Repeater CROSS Antenna 2m70cm17CROSS

Frequency Range: 430 – 440 MHz
Free Space Forward Gain: 14.45 dBi
Front-to-Back Ratio: 24 dB
Polarization: Horizontal
Nominal Input Impedance: 50 Ohms
SWR Across Entire Band: < 1.2
Maximum Power Input: 850 W
Matching Method: Direct feedthrough RG142 Teflon common mode choke (current balun)
Connector: “N”

 

Mechanical Specifications of Satellite Repeater CROSS Antenna 2m70cm17CROSS

2m Number of Elements: 6
70cm Number of Elements: 11
2m Elements Diameter: 8 mm Aluminum tube
70cm Elements Diameter: 4 mm rod
Dipoles Diameter: 8 mm Hard Copper tube, plastic coated
Element Mounting Position: 2m on the side, 70cm below the boom.
Balun and Connectors: Included
Boom Length: 2m
Boom Size: 20x20mm
Number of Boom Pieces: 2
Guy rope support: Not necessary. Strong boom
Mounting Mast Diameter: 43 – 70 mm 1-11/16″ – 2-3/4″ OD
Clamp: Goiath, M8 screws Stainless Steel
Survival Wind Speed: 150km/h
Net Weight: 1.9kg
Gross Weight: 2.9kg
Transportation Length: 1.2m

The antenna must be mounted on a fiberglass (plastic) mast.
The old name of the antenna was PA144-432-CROSS-17-2A

 

Antennas-Amplifiers Product Benefits. A Major advance in antenna design.

• F/B and G/T superiority.

All antennas have been calculated using state-of-the-art full 3D EM modeling software including the influence of the boom, bracket, baluns, and connectors. The performance of antennas designed using these techniques is exceptional, far better than antennas designed using the EZNEC program.

• No tuning antennas.

Before dispatch, we assemble and test each antenna’s characteristics. No need to tune any element to get perfect SWR on the intended frequency range. Everything is pre-tuned.

• Easy to set up.

Everything is labeled, just put number to number. Everything is included in the box: Antenna, balun, bracket, and guy rope support if needed. Yours is to assemble and have fun!

• Mechanical properties.

We believe that our antennas are the world’s strongest and are mechanically constructed much better than any antennas from other manufacturers.

 

All 2m / 70cm antennas: 2m/70cm antennas
2m / 70cm Common Connector antenna
2m / 70cm Two Connector Dual Band