2m 11elements Low Noise LightWeight Antenna 2m11DXL

2m 11elements Low Noise LightWeight Antenna 2m11DXL

(1 customer review)

265,00 

2m 11elements Low Noise LightWeight Antenna 2m11DXL DX-EME

2m 11elements Low Noise LightWeight Antenna 2m11DXL DX-EME

DX-ing and EME 2m 11elements Low Noise LightWeight Antenna 2m11DXL. No guy rope support. Easy to assemble and disassemble for portable and stationary use. Excellent flat SWR from 144-145MHz. Great for Terrestrial VHF Contest or EME work. Excellent G/T. Low Noise Design.

 

2m 11elements Low Noise LightWeight Antenna 2m11DXL Appearance:

2m 11elements Low Noise LightWeight Antenna 2m11DXL

 

What does 2m11DXL mean?

  • 2m – 2m band
  • 11 – 11 elements
  • DX – Covers DX part of 2m band 144-145MHz
  • LLight version without guy rope support

 

Electrical Specifications of 2m 11elements Low Noise LightWeight Antenna 2m11DXL

Frequency Range: 144 – 145 MHz
Free Space Forward Gain: 14.8 dBi
Front-to-Back Ratio: 27 dB
-3 dB Horizontal Beamwidth: 35°
-3 dB Vertical Beamwidth: 38°
Polarization: Horizontal or vertical
Nominal Input Impedance: 50 Ohms
SWR Across Entire Band: < 1.2
Maximum Power Input: 500 W (more by request)
Matching Method: Direct feed through common mode choke (current balun)
Connector: “N” (or 7/16 DIN by request)

 

Power versions of 2m 11elements Low Noise LightWeight Antenna 2m11DXL

“P” Power version “N” Input connector RG142 5mm Teflon balun cable: 1500W 2m11DXLP
“E”Extra power 7/16 DIN Input connector SF250 7mm Teflon balun cable: 2000W 2m11DXLE
“EX”EXtreme power 7/16 DIN Input connector RG115 10mm Teflon balun cable: 5000W 2m11DXLEX

 

Mechanical Specifications of 2m 11elements Low Noise LightWeight Antenna 2m11DXL

Number of elements: 11
Element Diameter: 8 mm Aluminum tube
Dipole Diameter: 8 mm Hard Copper tube, plastic coated
Longest element: 1040 mm
Element Mounting Position: Below the Boom
Balun and Connector: Included
Boom Length: 5.72 m
Tapered Boom: 40x40mm, 30x30mm
The number of Boom Pieces: 4
Guy rope support: No
Mounting Mast Diameter: 43 – 70 mm 1-11/16″ – 2-3/4″ OD
Clamp: 2 x M8 Stainless Steel
Survival Wind Speed: 180 km/h
Net Weight: 6.7 kg
Gross Weight: 8,2 kg
Transportation Length: 1.49 meters

 

Stacking distances of 2m 11elements Low Noise LightWeight Antenna 2m11DXL

Two antennas, horizontal distance 3.3m for F/S -12.5 dB. Gain 17.7dBi (+2.9dB)
Four antennas, horizontal distance 3.6m for F/S -12.5 dB. Gain 20.8dBi (+6dB)

Two antennas, vertical distance 3.1m for F/S -12.5 dB. Gain 17.72dBi (+2.92dB)
Four antennas, vertical distance 3.3m for F/S -12.5 dB. Gain 20.8dBi (+6dB)

 

Four 2m11DXL Antennas in “H” configuration MAX GAIN:

Horizontal 3.25m, Vertical 3.1m, Gain 20.62 dBi (+5.82 dB) for F/S -12.5 dB

 

Four 2m11DXL Antennas in “H” configuration, LOWEST Sidelobes for urban areas:

Horizontal 2.8m, Vertical 2.75m, Gain 20.15 dBi (+5.35 dB) for F/S -17 dB

 

2m11DXL Azimuth Radiation Pattern

Great suppression of all side lobes.

144MHz Contest Portable Low Noise Yagi Antenna AZ Radiation Pattern

 

Antenna shares the same design as 2m11DXP

The old name of the antenna was PA144-11-6B

All 2-meter antennas: 2-meter antennas

 

Weight 8,2 kg
Dimensions 149 × 19 × 12 cm

1 review for 2m 11elements Low Noise LightWeight Antenna 2m11DXL

  1. Jeff

    Results of the first operation are very encouraging! On 2m only this morning, easily working stations out to about 300km. What I didn’t expect was how absolutely “quiet” the 2m11DXL is!!
    Signals seem to “jump” out of the noise, side lobes and f/b ratios seem very suppressed, as advertised.

    Thanks again!!
    Jeff AA4FQ

Add a review