6m 50-51MHz 300W Low Loss Band-pass Filter for Magic Band
Intended to be used with linear amplifiers up to 300 W output.
Although this filter is intended to be used as a transmitting filter, its design also allows it to be used as a receiving filter. It can be used before Wide Band LNA with PGA-103+ to protect sensitive devices from strong out-of-band signals.
A low Insertion loss filter is excellent for placing before any LNA to protect the receiver from HF transmitters in DX expeditions or in multi-multi environments. This BPF will suppress any harmonic on 100 MHz, 150 MHz, and more, and it will protect it from HF stations.
This Band-Pass filter is suitable for receiving as well as transmitting and works very well both ways.
The external appearance of the filter:
The recorded data on the assembled filter with HP8753ES full 2-port calibrated are presented below.
We measured Return Loss (S11) and Insertion Loss (S21). Characteristics of 50 MHz Bandpass filter for up to 300 W transmitter.
Achieved results on Band-pass Filter (Attenuation) |
||||||||||||
HF Band
|
||||||||||||
Bandwidth: 50 – 51 MHz
|
||||||||||||
FM attenuation
|
||||||||||||
144 MHz / 432 MHz Band Attenuation
|
1. Measured HF attenuation:
2. Measured FM and VHF attenuation:
3. Measured UHF attenuation:
Feel free to send e-mail if you need something more specific.
All band-pass filters are here: HF, VHF, and UHF Band-Pass Filters
6 Meter Band-Pass Filters 50 W, 100 W, 200 W, 300 W, 1500 W, 4000W and 5000W
Reviews
There are no reviews yet.