70cm CROSS Antenna 1200W Polarization Switch H-V-RHCP

70cm CROSS Antenna 1200W Polarization Switch H-V-RHCP

305,00 

70cm CROSS Antenna 1200W Polarization Switch H-V-RHCP LEO Satellites and EME

SKU: 1744 Categories: , ,

Ultimate 70cm CROSS Antenna 1200W Polarization Switch H-V-RHCP

 

Achieve much better results in EME contests, DX expeditions, or LEO Satellite work with this 70cm CROSS Antenna 1200W Polarization Switch H-V-RHCP

70cm CROSS Antenna 1200W Polarization Switch H-V-RHCP will allow you to change the three most important polarizations with a full 1200W power. Horizontal, Vertical, and Right Hand Circular polarization. The only condition is the electrical length between two perpendicular dipoles must be 90° or 173mm on a 70cm band.

That condition satisfies all our 70cm CROSS antennas.

It does not matter do you want to work LEO Satellites that you need RHCP polarization or terrestrial / EME contests where in most cases, you will need just horizontal or vertical. You will be always at your best. Maximum polarization mismatch will be 3dB or less. With the possibility to fast switch the best appropriate polarization.

 

Ultimate 70cm CROSS Antenna 1200W Polarization Switch H-V-RHCP

70cm CROSS Antenna 1200W Polarization Switch H-V-RHCP

 

 

How does 70cm CROSS Antenna 1200W Polarization Switch H-V-RHCP work?

Use two identical cables of any length. On one side connect to the 70cm CROSS antenna.
On the other side, connect the cable from the horizontal polarization antenna to the appropriate input on the 70cm polarization switch. The same is true for the vertical polarization antenna.

The default position is horizontal polarization. It means you do not need any power supply to connect to the switch. The transceiver will be connected automatically to the horizontal polarization antenna.

The inside schematic is below.

 

2m and 70cm CROSS Antenna Transmit/Receive Horizontal-Vertical-RHCP Schematic

 

The 2-Way divider is internal. Solved with high-power Teflon coaxial cable.
Default polarization is Horizontal. You do not need to apply any voltage to the 70cm CROSS Switch.
Apply +12V to +12V pin on the 70cm CROSS Antenna 1200W Polarization Switch H-V-RHCP
Vertical polarization is obtained with relay 3 (Rly3) on the schematic or the device setting pin “V” to “-“.
RHCP polarization is obtained by applying a voltage to relays 1, 2, and 4 or on the device setting pin “RHCP to “-“

2m and 70cm CROSS Antenna Polarization Switch H-V-RHCP 1200W Schematic.pdf

 

70cm CROSS Antenna 1200W Polarization Switch H-V-RHCP 430-450MHz Wiring

70cm CROSS Antenna 1200W Polarization Switch H-V-RHCP 430-450MHz Wiring

 

 

70cm CROSS Antenna Polarization Switch H-V-RHCP 1200W Wiring.pdf

 

Two 70cm CROSS Antennas 430-450MHz Polarization Switch H-V-RHCP 1200W Wiring

Two 70cm CROSS Antennas 430-450MHz Polarization Switch H-V-RHCP 1200W Wiring

 

 

Two 70cm CROSS Antennas Polarization Switch H-V-RHCP 1200W Wiring.pdf

All is the same for the four antennas. Instead of two 2-Way dividers use 4-Way 2m dividers

 

What do you need to switch polarizations from horizontal to vertical and RHCP?

  1. The simplest solution is to use just a 3-way rotary switch. On one side connect to the power supply and on the other side to 70cm CROSS Antenna 1200W Polarization Switch H-V-RHCP terminals.
  2. The same but with added LEDs for indication of actual polarization.
  3. Electronic switching for station automation.

 

70cm CROSS Antenna 1200W Polarization Switch H-V-RHCP 430-450MHz How to Switch Polarizations

70cm CROSS Antenna 1200W Polarization Switch H-V-RHCP 430-450MHz How to Switch Polarizations

 

 

70cm CROSS Antenna 1200W Polarization Switch H-V-RHCP 430-450MHz How to Switch Polarizations.pdf

 

70cm CROSS Antenna 1200W Polarization Switch H-V-RHCP Measurements:

 

Excellent results.
On horizontal polarization achieved minimal insertion loss of just 0.22dB with a super low SWR of just 1.004.

70cm CROSS Antenna 1200W Polarization Switch H-V-RHCP 430-450MHz Horizontal Antenna Insertion Loss and SWR

 

Vertical polarization. Achieved minimal insertion loss of just 0.24dB with super low SWR of just 1.009.

 

70cm CROSS Antenna 1200W Polarization Switch H-V-RHCP 430-450MHz Vertical Antenna Insertion Loss and SWR

 

RHCP polarization. SWR is just 1.03 on 70cm CROSS Antenna 1200W Polarization Switch H-V-RHCP

 

70cm CROSS Antenna 1200W Polarization Switch H-V-RHCP 430-450MHz RHCP SWR

 

The phase difference between Horizontal and Vertical antenna connectors after calibrating on horizontal

 

70cm CROSS Antenna 1200W Polarization Switch H-V-RHCP 430-450MHz RHCP Calibrated Phase on Horizontal Polarization Connector

 

70cm CROSS Antenna 1200W Polarization Switch H-V-RHCP 430-450MHz RHCP Measured Phase Difference on Vertical Polarization Connector

The achieved phase difference is just 0.63°

70cm CROSS Antenna 1200W Polarization Switch H-V-RHCP 430-450MHz RHCP Measured Phase Difference on Vertical Polarization Connector

 

These ultimate product results are achieved on Rogers substrate.
Polarization switching should be done exclusively “on cold”. Without any applied power.

Use this 70cm CROSS Antenna 1200W Polarization Switch H-V-RHCP for EME contests, DX expeditions, or LEO Satellites.

2m “Brothers in Arms” H-V-RHCP Switch is here.

 

Reviews

There are no reviews yet.

Be the first to review “70cm CROSS Antenna 1200W Polarization Switch H-V-RHCP”